JVC RX-9000VBK manual Try to operate your VCR by pressing VCR 1 Power, Release VCR 1 Power

5. Release TV/CATV/DBS POWER.

After setting the remote control mode selector to “CATV/DBS,” you can perform the following operations on the CATV convertor or on the DBS tuner:

TV/CATV/DBS POWER: Turns on and off the CATV

	converter or DBS tuner.
CHANNEL +/–:	Changes the channels.
1 – 10, 0, 100+ (+10):	Selects the channel.
	100+ (+10) button will function
	as the ENTER button if your
	equipment requires pressing ENTER
	after selecting a channel number.

6. Try to operate your CATV converter or DBS tuner by pressing TV/CATV/DBS POWER.

When your CATV converter or DBS tuner turns on or off, you have entered the correct code.

If there are more than one code listed for your brand of

CATV converter or DBS tuner, try each one until the correct one is entered.

6. Try to operate your VCR by pressing VCR 1 POWER.

When your VCR turns on or off, you have entered the correct code.

If there are more than one code listed for your brand of

VCR, try each one until the correct one is entered.

To change the transmittable signals for operating a DVD player

1.Set the remote control mode to “AUDIO/TV/ VCR.”

2.Press and hold VCR 1 POWER.

3.Press DVD.

4.Enter manufacturer’s code (two digits) using

buttons 1–9, and 0.

See the list on page 62 to find the code.

Examples: For a JVC product, press 0, 1.

For a Sony product, press 0, 5.

To change the transmittable signals for operating another manufacturer’s VCR

1.Set the remote control mode to “AUDIO/TV/ VCR.”

2.Press and hold VCR 1 POWER.

3.Press VCR 1.

4.Enter manufacturer’s code (two digits) using

buttons 1–9, and 0.

See the list on page 62 to find the code.

Examples: For a JVC product, press 1, 7.

For an NEC product, press 3, 9.

5. Release VCR 1 POWER.

The following button can be used for operating the VCR (with the remote control mode selector set to “AUDIO/TV/VCR”):

VCR 1 POWER Turns on and off the VCR.

After pressing VCR 1 or VCR 1 CONTROL (with the remote control mode selector set to “AUDIO/TV/VCR”), you can perform the following operations on the VCR 1:

CHANNEL +/– Changes the TV channels on the VCR.

1 – 10, 0, 100+ (+10) Selects the TV channels on the VCR.

	The 100+ (+10) button will function
	as the ENTER button if your VCR
	requires pressing ENTER after
	selecting a channel number.
PLAY	Starts playback.
1	Rewinds a video tape.
`	Fast winds a video tape.
STOP	Stops operation.
PAUSE	Pauses.

ƒREC: Starts recording or enters recording pause.

Note:

You can use either VCR 1 button or the VCR 1 CONTROL button to activate the buttons listed above. If you press VCR 1, the playing source also changes. On the other hand, if you press VCR 1 CONTROL, the playing source does not change.

5. Release VCR 1 POWER.

After pressing DVD (or DVD MULTI: only for the main room operations) (with the remote control mode selector set to “AUDIO/TV/VCR”), you can perform the following operations on a DVD player:

PLAY:	Starts playing.
4:	Returns to the beginning of the current (or previous)
¢:	track.
	Skips to the beginning of the next track.
STOP:	Stops playing.

PAUSE: Stops playing temporarily. To release it, press PLAY.

After pressing DVD (or DVD			CENTER
MULTI: only for the main room		2	3
operations) , these buttons can be
			MENU
used for the DVD menu operations.	REAR TONE		REAR-L
	4	5	6

	ENTER
Note:	REAR-R

8

For detailed menu operations, refer to the

instructions supplied with the discs or the

DVD player.

6.Try to operate your DVD player by pressing one of the above buttons.

•DO NOT forget to turn on the DVD player before pressing one of the above buttons.

61