JVC RX-9000VBK Canceling the Sub-roomOperations, Selecting the Sub-roomSource to Play, Notes

SUB ROOM

ON/OFF

SUB ROOM

ON/OFF

SUB ROOM

CONTROL

Canceling the Sub-room Operations

On the front panel:

To stop the sub-room operations and sounds from the sub-room speakers, press SUB ROOM ON/OFF.

The SUB ROOM ON/OFF lamp on the button goes off, and the SUB ROOM speaker (SPEAKERS 2) lamp and SUB ROOM CONTROL lamp on the front panel also go off (no sound will be heard in the sub-room).

•You cannot use this receiver for the sub-room operations any more.

To use this receiver for the sub-room operations again

Selecting the Sub-room Source to Play

On the front panel:

SOURCE SELECTOR

Turn SOURCE SELECTOR until the source name you want appears on the display.

•As you turn the selector, the source changes as follows:

CD OPHONO OTAPE (or MD) O FM OAM ODVD O DBS OVCR 1 OCDR/VCR 2 OVIDEO O

(back to the beginning)

Selected source name for sub-room appears

1.Press SUB ROOM ON/OFF.

The SUB ROOM ON/OFF lamp on the button lights green, and the SUB ROOM speaker (SPEAKERS 2) lamp on the front panel also lights green if it has been activated.

2.Press SUB ROOM CONTROL.

The SUB ROOM CONTROL lamp on the button lights green.

SUB ROOM

ON/OFF

SUB ROOM CONTROL

Current volume level for sub-room is shown here

From the remote control:

Press one of the source selecting buttons.

From the remote control:

To stop the sub-room operations and sounds from the sub-room

speakers, press SUB ROOM ON/OFF.

The SUB ROOM ON/OFF lamp on the front panel goes off, and the SUB ROOM speaker (SPEAKERS 2) lamp and SUB ROOM CONTROL lamp on the front panel also go off (no sound will be heard in the sub-room).

•You cannot use this receiver for the sub-room operations any more.

To use this receiver for the sub-room operations again, press SUB ROOM ON/OFF again.

The SUB ROOM ON/OFF lamp on the front panel lights green, and the SUB ROOM speaker (SPEAKERS 2) lamp on the front panel also lights green if it has been activated.

Notes:

•If you have turned off the sub-room sound with the volume level set at more than level “30, the volume level will be automatically set at level “30” next time you turn on the sub-room sound.

•If “TURN ON MAIN OR SUB ROOM” appears on the display, press MAIN ROOM ON/OFF or SUB ROOM ON/OFF to listen to the sound in the main room or in the sub-room; otherwise, the receiver will turn off after about 1 minute.

DVD	DVD MUILTI	CD	TAPE/MD
TV/DBS	VIDEO	PHONO	FM/AM
VCR 1	CDR/VCR 2

DVD	Select the DVD player.
CD *	Select the CD player.
TAPE/MD * Select the cassette deck (or the MD recorder).
TV/DBS	Select the DBS tuner.
	• Does not work for selecting TV sound.
VIDEO	Select video component connected to the VIDEO
	jacks.
PHONO *	Select the turntable.
FM/AM *	Select an FM or AM broadcast.
	• Each time you press the button, the band alternates
	between FM and AM.
VCR 1	Select the video component connected to the VCR 1

jacks.

CDR/VCR 2 * Select the CD recorder or video component connected to the CDR/VCR 2 jacks.

Notes:

•When you press one of the source selecting buttons on the remote control marked above with an asterisk (*), the receiver automatically turns on.

•The source lamp does not light for the sub-room source.

•You cannot select the following as the sub-room source:

–“TV SOUND”

–“DVD MULTI”

–Any digital input such as “DVD DIGITAL” or “CD DIGITAL.” You can only select the analog input as the sub-room source.

•You can select the video components as the sub-room source; however, you can see no pictures.

21