JVC RX-9000VBK manual Multi-room Operations, Required Speaker Connections for the Sub-room, Merits

Multi-room Operations

Before operating this receiver any further, be familiar with this Multi-room function.

This function enables you to listen to different sources in two different places (we call these two places “main room” and “sub-room”) by using this receiver only.

This section explains only required speaker connections, the concept, and basic operations of the Multi-room function. For more detailed operations, see the respective pages in this manual.

Required Speaker Connections for the Sub-room

Connection 			Connection ı
See also “Connecting the front speakers” on page 5.			Connect the input jacks of another amplifier to the SUB ROOM
			PRE OUT jacks on the rear panel, using a cable with RCA pin
Right speaker	MAIN ROOM SPEAKERS	Left speaker	plugs (not supplied).
				SUB ROOM
				PRE OUT	RIGHT LEFT

		FRONT 1 SPEAKERS
						CAUTION :
+	RIGHT	–	–	LEFT	+	SPEAKER IMPEDANCE
						4 ~ 6	LOW
						8 ~ 16	HIGH
						SPEAKER
						LOAD		Another amplifier
+ RIGHT		–	– LEFT		+	SELECTOR
CAUTION : SPEAKER IMPEDANCE 8 ~ 16
	FRONT 2 / SUB ROOM SPEAKERS

Right speaker		SUB ROOM SPEAKERS	Left speaker	Right speaker		SUB ROOM SPEAKERS	Left speaker
	Merits:				Merits:
	• This connection DOES NOT require a power amplifier.				• This connection DOES allow you to use the DSP mode (see
	Demerits:				page 32) using the center/rear speakers and the DVD MULTI
	• When the sub-room speakers are activated, this connection				playback mode (see page 41) for the main room sources.
					Demerits:
	DOES NOT allow you to use the DSP mode (see page 32)
					• This connection DOES require another amplifier.
	using the center/rear speakers and the DVD MULTI playback
	mode (see page 41) for the main room sources.
	To use the front speakers connected to the FRONT 2/SUB			To use the front speakers in the sub-room
	ROOM SPEAKERS terminals for the sub-room			• No settings are required on this receiver.
	See “Setting the Front Speakers Either for the Main Room or			• Turn on and operate the other amplifier connected to the SUB
	Sub-room” on page 23, and “Activating the Sub-room Front				ROOM PRE OUT jacks correctly.
	Speakers” on page 22.
	Note:			Note:
	Using long speaker signal cables will deteriorate the signals, and			Using long cables will deteriorate the signals, and will result in poor
	will result in poor sound quality.			sound quality.

12