AV COMPU LINK Remote Control System
The AV COMPU LINK remote control system allows you to operate JVC video components (TV, VCR, and DVD player) through the receiver.
To use this remote control system, you need to connect the video components you want to operate, following the procedure below.
1.If you have already plugged your VCR 1 (VCR connected to the VCR 1 jacks), DVD player, TV, and this receiver into the AC outlets, unplug their AC power cords first.
2.Connect the IR signal transmitter (supplied) to the IR OUT on the rear, and place it so that it is aimed at the remote sensor on the target video components.
•See “CONNECTIONS 1” below.
3.Connect your VCR 1, DVD player, TV, and this receiver as follows, using the cables with the monaural
•See “CONNECTIONS 2” below.
4.Connect the audio input/output jacks on VCR 1, DVD player, TV, and this receiver using the cables with RCA pin plug.
•See pages 7 and 8.
5.Connect the video input/output jacks on VCR 1, DVD player, TV, and this receiver, using the cables with RCA pin plugs or with
•See “CONNECTIONS 3” on the next page.
6.Plug the AC power cords of the components into the AC outlets.
7.When turning on the TV for the first time after the AV COMPU LINK connection, turn the TV volume to the minimum using the TV volume control on the TV.
8.Turn on the other connected components first, then turn on this receiver.
•When turning on the VCR 1, use the remote control supplied with this receiver (press VCR 1 POWER).
CONNECTIONS 1: | On the rear panel |
| RF REMOTE |
Target video component(s)
ANTENNA
IR OUT
Less | than |
|
| |
(3 | 10 |
| ||
m) | feet | |||
| ||||
|
|
|
At an angle of
approx. 60°
IR signal transmitter
CONNECTIONS 2: | TV |
VCR 1 | DVD player |
VHS |
DVD |
AV
COMPU LINK
AV
COMPU LINK
IMPORTANT:
Connect to the terminal indicated in the illustration.
DO NOT connect to the TV terminal.
AV
COMPU LINK
If the AV COMPU LINK terminal on the TV is “RECEIVER/AMP”
| AV |
| COMPU LINK |
| RECEIVER/AMP |
| RECEIVER/ |
EX | AMP |
| (VCR) |
If the AV COMPU LINK terminal on the TV is “AV COMPU LINK EX”
AV
COMPU LINK EX
CAUTION:
The AV COMPU LINK remote control system cannot control the DBS tuner connected to the TV SOUND/DBS jacks, and video components connected to the VIDEO and CDR/VCR 2 jacks on the receiver.
Notes:
•When connecting only the VCR 1 or DVD player to this receiver, connect it directly to the receiver using cable with the monaural
•Refer also to the manual supplied with your video components.
54