JVC RX-9000VBK Selecting the Main Room Source to Play, Press one of the source selecting buttons

To use this receiver for the main room operations again, press MAIN ROOM ON/OFF again.

The MAIN ROOM ON/OFF lamp on the front panel lights red, and the currently selected Front speaker lamps on the front panel also light red.

Notes:

•If you have turned off the receiver with the volume level set at more than level “30,” the volume level will be automatically set at level “30” next time you turn on the receiver.

•If “TURN ON MAIN OR SUB ROOM” appears on the display, press MAIN ROOM ON/OFF or SUB ROOM ON/OFF to listen the sound in the main room or in the sub-room; otherwise, the receiver will turn off after about 1 minute.

Selecting the Main Room Source to Play

On the front panel:

SOURCE SELECTOR

Turn SOURCE SELECTOR until the source name you want appears on the display.

•As you turn the selector, the source changes as follows:

CD OPHONO OTAPE (or MD) OFM OAM ODVD O DVD MULTI OTV SOUND (or DBS) OVCR 1 O CDR/VCR 2 OVIDEO O(back to the beginning)

The selected source lamp also lights up.

	DVD		CD
TV SOUND/DBS		PHONO
VCR 1		TAPE/MD
CDR/VCR 2			FM
VIDEO			AM

•The DVD lamp lights up both for “DVD” and “DVD MULTI.”

From the remote control:

Press one of the source selecting buttons.

DVD	DVD MUILTI	CD	TAPE/MD
TV/DBS	VIDEO	PHONO	FM/AM
VCR 1	CDR/VCR 2

Selected source name appears

DVD	Select the DVD player.
DVD MULTI	Select the DVD player for viewing the digital video
	disc using the analog discrete output mode (5.1 CH
	reproduction) on the DVD player.
	To enjoy the DVD MULTI playback, see page 41.
CD *	Select the CD player.
TAPE/MD *	Select the cassette deck (or the MD recorder).
TV/DBS	Select TV sounds (or the DBS tuner).
VIDEO	Select video component connected to the VIDEO
	jacks.
PHONO *	Select the turntable.
FM/AM *	Select an FM or AM broadcast.
	• Each time you press the button, the band alternates
	between FM and AM.
VCR 1	Select the video component connected to the VCR 1

jacks.

CDR/VCR 2 * Select the CD recorder or video component connected to the CDR/VCR 2 jacks.

Notes:

•When connecting an MD recorder (to the TAPE/MD jacks), and a DBS tuner (to the TV SOUND/DBS jacks), change the source name shown on the display. For details, see page 23.

•When you press one of the source selecting buttons on the remote control marked above with an asterisk (*), the receiver automatically turns on.

Signal and speaker indicators on the display

•The signal indicators light up to indicate the incoming channel signals.

–Only the indicators for the incoming signals light up.

•The frame of the signal indicator (except for “LFE” and “S”) lights up if the corresponding speaker is set to “LARGE” or “SMALL” (for subwoofer, “YES”).

–The frames of “L” and “R” indicators always light up.

L C R

SUBWFR LFE

LS S RS

L: • When digital input is selected: Lights up when the left

channel signal comes in.

•When analog input is selected: Always lights up.

R: • When digital input is selected: Lights up when the right

channel signal comes in.

•When analog input is selected: Always lights up.

C: Lights up when the center channel signal comes in.

LS: Lights up when the left rear channel signal comes in.

RS: Lights up when the right rear channel signal comes in.

S: Lights up when the monaural rear channel signal comes in.

LFE: Lights up when the LFE channel signal comes in.

Notes:

•When “SUBWOOFER” is set to “YES,” SUBWFR lights up.

•When you select “DVD MULTI,” all the signal indicators except “S” light up.

16