Using the On-Screen Menus
You can use the Menus on the TV screen to control the receiver.
To use this function, you need to connect the TV to the MONITOR OUT jack on the rear panel (see page 8), and set the TV’s input mode to the proper position to which the receiver is connected.
•When the TV’s input mode is incorrect; for example, a different video input or TV tuner mode is selected, you cannot show the Menus on the TV screen.
The following operations are only possible while the receiver is ready for the main room operations, and are used for the main room sources.
IMPORTANT:
When using the remote control:
Check to see if the
Selecting Different Sources for Picture and Sound (Also see page 17)
1. Press MENU.
control mode selector are set to the correct position:
•
To operate this receiver for the main room,
set it to “MAIN ROOM.”
• Remote control mode selector:
To operate this receiver, set it to “AUDIO/TV/
VCR.”
MAIN SUB
ROOM ROOM
AUDIO/
TV/VCR
CATV/DBS
The MAIN MENU appears on the TV.
•Pressing one of the %/ Þ/ @/ #buttons also displays the
MAIN MENU.
2. Press %/ Þto move to “VISUAL.”
3. Press @/ #to select a different video source.
4. When you finish, press EXIT.
MAIN | SUB |
|
|
ROOM | ROOM | STANDBY | ON |
MAIN ROOM | SUB ROOM | TV/CATV/DBS | VCR 1 |
ON/OFF | ON/OFF | POWER | POWER |
DVD | DVD MUILTI | CD | TAPE/MD |
TV/DBS | VIDEO | PHONO | FM/AM |
VCR 1 | CDR/VCR 2 | ANALOG/DIGITAL | SLEEP |
SURROUND | CNTR TONE | CENTER | |
ON/OFF | 1 | 2 | 3 |
|
| MENU | |
SURROUND | REAR TONE | ||
MODE | 4 | 5 | 6 |
|
| ENTER | |
SEA MODE | |||
| 7/P | 8 | 9 |
SOUND | TEST | SUBWOOFER | |
| 10 | 0 | +10 |
| RETURN | FM MODE | 100+ |
AUDIO/
TV/VCR
MENU
| CATV/DBS |
| SET |
EXIT | TEXT |
| DISPLAY |
TV VOL | CHANNEL | VOLUME | |
TV/VIDEO | VCR 1 | TAPE/MD | MUTING |
| CONTROL |
| |
/REW | PLAY | FF/ |
DOWN TUNINGUP
REC STOPPAUSE
MENU
SET
EXIT
The menu disappears from the TV.
Activating the DSP Modes (Also see page 40)
1. Press MENU.
The MAIN MENU appears on the TV.
•Pressing one of the %/ Þ/ @/ #buttons also displays the
MAIN MENU.
2. Press %/ Þto move to “MODE.”
3. Press @/ #to select the
DSP mode you want to use.
Selecting the Main Room Source to Play (Also
see page 16)
1. Press MENU.
The MAIN MENU appears on the TV.
•Pressing one of the % / Þ / @/ #buttons also displays the
MAIN MENU.
Shows the buttons you can use on the current menu.
In this case, use % / Þ to
move up and down, and @ / # to select, adjust or set the item.
Notes:
•“INPUT” appears only when the digital input (DIGITAL IN) terminal setting has been correctly done for the digital source currently selected. (See page 26.)
•The
4.When you finish, press EXIT.
The menu disappears from the TV.
Selecting the Analog or Digital Input Mode
(Also see page 26)
This selection is only possible when the digital input (DIGITAL IN) terminal setting has been correctly done for the digital source currently selected.
1. Press MENU.
The MAIN MENU appears on the TV.
•Pressing one of the %/ Þ/ @/ #buttons also displays the
MAIN MENU.
2.Press %/ Þto move
to “INPUT.”
3. Press @/ #to select the digital or analog input you want.
For details, see page 27.
2.Press % / Þto move to “SOURCE.”
3.Press @/ #to select the source.
4.When you finish, press EXIT.
The menu disappears from the TV.
4. When you finish, press EXIT.
The menu disappears from the TV.
42