Selecting Your Favorite SEA Mode
(Also see page 31)
1. Press MENU.
The MAIN MENU appears on the TV.
•Pressing one of the %/ Þ / @/ #buttons also displays the
MAIN MENU.
2.Press %/ Þto move 
to “SOUND CONTROL,” then press @/ #.
The SOUND CONTROL menu appears.
3. Press %/ Þto move 
to “SEA,” then press @ / #.
The SEA menu appears.
4. Press %/ Þto move 
to “SEA MODE.”
5.Press @/ #to select the SEA mode you want.
6.When you finish, press EXIT repeatedly until the menu disappears from the TV.
Creating Your Own SEA Mode
(Also see page 31)
1. Press MENU.
The MAIN MENU appears on the TV.
•Pressing one of the %/ Þ / @/ #buttons also displays the
MAIN MENU.
2.Press %/ Þto move 
to “SOUND CONTROL,” then press @/ #.
The SOUND CONTROL menu appears.
3. Press %/ Þto move 
to “SEA,” then press
@/ #.
The SEA menu appears.
4. Press %/ Þto move 
to “SEA ADJUST.”
The SEA ADJUST menu appears.
5.Press %/ Þ/ @/ #to adjust the SEA mode as you want.
@/ # : Select the frequency ranges.
%/ Þ: Adjust the frequency levels.
6.Press SET to store the setting into the SEA
USERMODE.
•If you press EXIT, without pressing SET in this step, you can return to the SEA menu. (The adjustment you have made is active but not stored.)
7.When you finish, press EXIT repeatedly until the menu disappears from the TV.
Setting the Basic Setting Items (Also see
pages 23 – 27)
1. Press MENU.
The MAIN MENU appears on the TV.
•Pressing one of the %/ Þ/ @/ #buttons also displays the
MAIN MENU.
2.Press %/ Þto move 
to “SETTING,” then press @/ #.
The SETTING 1 or SETTING 2 menu appears.
3. Press %/ Þto move 
to the item you want to set or adjust, then press @/ #.
• To go to the SETTING 2 |
| ||
menu, move | to “NEXT | ||
PAGE,” then press @/ #. | |||
• To go back to the SETTING |
| ||
1 menu, move | to |
| |
“PREVIOUS PAGE,” then press @/ #.
On the SETTING 1 and 2 menus, you can do the following:
“SUBWOOFER”: | Set the subwoofer information (see |
| page 23). |
“FRONT SPK”: | Set the front speaker information (see |
| page 24). |
“CENTER SPK”: | Set the center speaker information (see |
| page 24). |
“REAR SPK”: | Set the rear speaker information (see |
| page 24). |
“CNTR DELAY”: | Adjust the delay time of the center |
| speaker output (see page 24). * |
“REAR DELAY”: | Adjust the delay time of the rear |
| speaker output (see page 24). ** |
“CROSSOVER”: | Set the crossover frequency |
| (see page 25). |
“LFE ATT.”: | Set the low frequency effect attenuator |
| level (see page 25). |
“COMP.”: | Set the dynamic range compression |
| (see page 25). |
“COAX. IN”: | Set the digital input terminal 1 |
| (see page 26). |
“OPT. IN”: | Set the digital input terminal 2/3/4 |
| (see page 26). |
“FL DISP.”: | Shows the disc text information on the |
| display (see page 27). |
“SPEAKER 2”: | Select where to use the speakers |
| connected to the FRONT 2/SUB |
| ROOM terminals (see page 23). |
Notes:
*Not adjustable when “CENTER SPK” is set to “NONE” (see page 24) or the SUB ROOM speaker (SPEAKERS 2) lamp is lit green (see page 22).
**Not adjustable when “REAR SPK” is set to “NONE” (see page 24) or the SUB ROOM speaker (SPEAKERS 2) lamp is lit green (see page 22).
4.When you finish, press EXIT repeatedly until the menu disappears from the TV.
45
