Sharp HT-CN400DVH Maintenance, Specifications, Cleaning the cabinet, Care of DVD/CD discs, E-51

Models: HT-CN400DVH

1 61
Download 61 pages 36.12 Kb
Page 58
Image 58
Maintenance / Specifications -

HT-CN400DVH HT-CN500DVH

ENGLISH

References

Maintenance / Specifications -

Maintenance

!Cleaning the cabinet

Periodically wipe the cabinet with a soft cloth and a diluted soap solution, then with a dry cloth.

"Do not use chemicals for cleaning (petrol, paint thinner, etc.). It may damage the cabinet finish.

"Do not apply oil to the inside of the unit. It may cause malfunctions.

!Care of DVD/CD discs

DVD/CD discs are fairly resistant to damage, however mistracking can occur due to an accumulation of dirt on the disc surface. Follow the guidelines below for maximum enjoyment from your DVD/CD collection and player.

"Do not write on either side of the disc, particularly the non-label side from which signals are read. Do not mark this surface.

"Keep your discs away from direct sunlight, heat, and excessive moisture.

"Always hold the DVD/CDs by the edges. Fingerprints, dirt, or water on the DVD/ CDs can cause noise or mistracking. If a DVD/CD is dirty or does not play properly, clean it with a soft, dry cloth, wiping straight out from the centre, along the radius.

NO

 

 

YES

 

 

Correct

 

 

 

 

 

 

 

 

 

 

 

Specifications

As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.

" General

Power source

AC 230 V, 50 Hz

 

 

 

 

Power consumption

HT-CN400DVH:

 

 

Power on: 88 W

 

 

Power stand-by: 0.6 W

 

 

 

 

 

HT-CN500DVH:

 

 

Power on: 105 W

 

 

Power stand-by: 0.6 W

 

 

 

 

Dimensions

Width: 430 mm (16-7/8")

 

 

Height: 53 mm (2-1/8")

 

 

Depth: 337 mm (13-1/4")

 

 

 

 

Weight

4.2 kg (9.3 lbs.)

 

 

 

 

Audio input terminals

Analogue input (IN 1): RCA type

1 pair (L/R)

 

Analogue input (IN 2): RCA type

1 pair (L/R)

 

 

 

Audio output termi-

Analogue output (OUT): RCA type

1 pair (L/R)

nals

Headphones: 16 - 50 ohms (recommended: 32 ohms)

 

 

 

 

Video output termi-

SCART output: SCART terminal

1

nals

S-video output: S-terminal 1

 

 

 

 

Video output: RCA type 1

 

 

 

 

"Amplifier (HT-CN400DVH)

7

-

Output power

Front speakers:

RMS: 60 W (30 W + 30 W) (10 % T.H.D., 1 kHz)

Centre speaker:

RMS: 30 W (10 % T.H.D., 1 kHz)

Surround speakers:

RMS: 60 W (30 W + 30 W) (10 % T.H.D., 1 kHz)

Subwoofer:

RMS: 50 W (10 % T.H.D., 100 Hz)

SHARP 92LCN400E0270

E-51

03/7/2

HTCN400_500DVH_E.fm

92LCN400E0270

Page 58
Image 58
Sharp HT-CN400DVH Maintenance, Specifications, Cleaning the cabinet, Care of DVD/CD discs, E-51, References, 03/7/2