Sharp HT-CN400DVH System installation, Placing the speaker system, Magnetically shielded speakers

HT-CN400DVH HT-CN500DVH

ENGLISH

System installation

Preparation for Use - System installation -

E-15

!Placing the speaker system

The best surround effect will be achieved by placing each speaker at the same distance from the listening position.

It is recommended to arrange the speakers as shown below.

Front	Centre
	speaker Front
speaker (left)	speaker (right)
Subwoofer

Surround	Surround
speaker (left)
	speaker (right)

Note:

If speakers cannot be placed at equal distances, refer to "Speaker delay time set- ting" (see page 45).

Installation image:

The speaker stands and speaker wall brackets are optionally available (see page 3). Refer to their instructions for assembly.

Notes:

"Place the TV halfway between the front speakers.

"It is recommended that the centre speaker be placed near the television.

"Place the surround speakers at a position just above the height of your ears.

"The subwoofer vibrates whilst reproducing bass. Place it on a stable, sturdy sur- face.

"The subwoofer reproduces bass. Place it anywhere you like.

Centre speaker

Same distance Same distance

Front speaker (left) Front speaker (right)

!Magnetically shielded speakers

The front and centre speakers may be placed beside or near the TV as they are mag- netically shielded. However, discolouration may occur depending on the TV type.

If colour variation occurs...

Turn off the TV (with the power switch).

After 15 - 30 minutes, turn the TV on again.

If the colour variation is still present...

Move the speakers further away from the TV.

Refer to the manual of the TV for details.

Note:

The surround speakers and subwoofer are not magnetically shielded.

4

SHARP 92LCN400E0270

03/7/2 HTCN400_500DVH_E.fm 92LCN400E0270