Integra DPS-10.5 instruction manual Audio Menu, PAL Output Setting Australian model only

Configuring the DPS-10.5—Continued

3

Remote controller

Enter

When you’ve finished, press the [Enter] button.

The setting is stored.

Use the same procedure to set the other parameters, pressing the [Enter] button when you’ve set each one.

Press the [Setup] button to exit the onscreen setup menu.

Dolby Digital > PCM

Choose this option if you’re connecting a stereo hi-fi amp with a digital input, an AV receiver with a built- in Dolby Pro Logic decoder, or an external D/A converter.

■DTS Out

With this setting you can configure the DIGITAL 1 AUDIO OUTs to output DTS audio as it is or to down- mix it into 2-channel PCM.

DTS (default)

PAL Output Setting (Australian model only)

With this setting you can specify how the DPS-10.5 out- puts video signals when playing NTSC format discs.

Auto (default)

Use this option if your TV or projector supports PAL and NTSC. When you play a PAL disc, the video output will be PAL. When you play an NTSC disc, it’ll be NTSC. The DPS-10.5 does not convert the format.

PAL

Use this option if your TV doesn’t support NTSC playback, or the picture is distorted when watching NTSC discs. The DPS-10.5 will convert NTSC for- mat video to a PAL-compatible format known as Mod PAL or 60 Hz PAL.

Notes:

•This setting can be changed only when playback is stopped.

•PAL and AUTO can also be selected from the front panel. With the DPS-10.5 turned on, while holding down the Next [ ] button, press the [Standby/On] button to select “Auto” or “PAL.”

Audio Menu

Digital Out/Digital1 (i.LINK)

With these settings you can determine how the DPS-10.5 outputs digital audio from its i.LINK sockets and DIGI- TAL 1 AUDIO OUTs. The options you choose will depend on the type of component that you connect to the DIGITAL 1 AUDIO OUTs.

■Dolby Digital Out

With this setting you can configure the DIGITAL 1 AUDIO OUTs to output Dolby Digital audio as it is or to downmix it into 2-channel PCM.

Dolby Digital (default)

Choose this option if you’re connecting a component with a built-in Dolby Digital decoder.

Choose this option if you’re connecting a component with a built-in DTS decoder.

DTS > PCM

Choose this option if you’re connecting a stereo hi-fi amp with a digital input or an external D/A converter.

Notes:

•When playing the DTS audio of a DTS CD, set the CD Audio Setup setting to DTS (see page 76).

■MPEG Out

With this setting you can configure the DIGITAL 1 AUDIO OUTs to output MPEG audio as it is or to down- mix it into 2-channel PCM.

MPEG

Choose this option if you’re connecting a component with a built-in MPEG decoder.

MPEG > PCM (default)

Choose this option if you’re connecting a stereo hi-fi amp with a digital input or an external D/A con- verter.

■Digital Out

With this setting you can turn the DIGITAL 1 AUDIO OUTs on or off. Depending on how you connect the DPS-10.5 to your other components, this can be useful in certain situations.

On (default)

DIGITAL 1 AUDIO OUTs are on.

Off

DIGITAL 1 AUDIO OUTs are off.

Notes:

• This setting has no effect on the analog audio outputs.

70