29
Connecting
—Continued
Using HDMI
Use the supplied HDMI cable to connect the DPS-10.5’s
HDMI OUT to an HDMI input on your AV receiver.
Alternatively, you can connect the DPS-10.5 directly to
the HDMI input on your TV.
Notes:
• Use the Digital Out/Digital 2 settings to match the
HDMI output format with your HDTV (see page 71).
•The DPS-10.5 supports HDCP (High-bandwidth Dig-
ital Content Protection), a protection system for digital
video. HDMI components that you connect to the
DPS-10.5 must also support HDCP.
• The DPS-10.5 supports High-Definition Multimedia
Interface Specification Information Version 1.0.
• See the tables on page 24 for details on how the
DPS-10.5 outputs video and audio from its HDMI
OUT socket.
HDMI & the DPS-10.5
■
Video
The DPS-10.5’s HDMI OUT supports the following
video resolutions:
• 640 x 480p (VGA), 60 Hz
• 720 x 480p (progressive), 60 Hz
• 720 x 576p (progressive), 50 Hz
• 1280 x 720p (progressive), 50/60 Hz
• 1920 x 1080i (interlaced
),
50/60 Hz
• Through Source Resolution (external input video is
output at the same resolution. DVD playback is output
at 480p or 576p)
If the connected HDTV or projector doesn’t support a
resolution, you may get no picture.
When playing a DVD, or when watching an external
video input source, the HDMI OUT works as follows.
On the DPS-10.5, you can select a resolution suitable for
use with the connected HDTV or projector (see
page 62).
■
Audio Formats
The DPS-10.5’s HDMI OUT supports the following
audio formats:
• PCM (48 kHz, 44.1 kHz)
• Dolby Digital
• DTS
• MPEG
If your HDMI-compatible TV or projector doesn’t sup-
port Dolby Digital, DTS, or MPEG, the HDMI OUT will
not output digital audio in that format. In this case, set
the Digital Out/Digital 2 setting (i.e., Dolby Digital Out,
DTS Out, or MPEG Out) to downmix to PCM (see
page 71).
To output 96 kHz PCM audio from a DVD-Video disc,
set the Linear PCM Out setting to Down Sample On (see
page 71).
Note that audio from DVD-Audio and SACD discs is not
output by the HDMI OUT. For these formats you need to
use the analog multichannel output (see page 33) or
i.LINK (see page 31).
HDMI
HDMI
IN
HDTV, projector
HDMI cable
(supplied)
Signal flow
Selected video input HDMI OUT
a
a. Only works with components that support HDCP (High-band-
width Digital Content Protection).
DVD playback (i.e.,
DPS-10.5)
DVD
b
External
S VIDEO VIDEO IN
External
b
b. Resolutions supported by the connected TV can be selected by
pressing the [Resolution] button (see page 62).
VIDEO VIDEO IN
External
b