Initial Setup—Continued

5

Press the [Enter] button, use the

 

 

Up and Down [ ]/[ ] buttons to

Remote controller select On or Off, and then press

the [Enter] button.

Enter

Choose Off if your multichannel amp has its own speaker setup function.

Choose On if your multichannel amp has no speaker setup function.

If you select Off, the following settings cannot be set and the Initial Setup menu closes. If you select On, the Speaker Setting menu appears.

Here you can specify the size of the speakers being fed from the FRONT, SURR 1/SURR 2, CENTER, and SUBWOOFER AUDIO OUTPUTs.

For speakers with a cone diameter larger than 6-1/2 inches (16 cm), spec- ify Large. For those with a smaller diameter, specify Small. See page 72 for more information.

6

Press the [Enter] button, use the

 

Left and Right []/[ ] buttons to Remote controller set the Subwoofer setting, and

 

then press [Enter] again.

 

Off: Select if no subwoofer is being

Enter

used.

 

 

On (default): Select if a subwoofer is

 

being used.

8

Use the Left and Right [ ]/[ ]

Remote controller

buttons to set the Center Speaker

setting, and then press the

 

[Enter] button.

Enter

Large: Select if the center speaker is

large.

 

Small (default): Select if the center speaker is small.

Off: Select if no center speaker is being used.

Note that if the Front Speaker Size is set to Small, the Large option cannot be selected.

9

Use the Left and Right [ ]/[ ]

Remote controller

buttons to set the Surround

Speaker setting, and then press

 

the [Enter] button.

Enter

Large: Select if the surround speakers

are large.

 

 

Small (default): Select if the surround

 

speakers are small.

 

Off: Select if no surround speakers are

 

being used.

 

The Initial Setup menu closes and the

 

setup is complete.

 

The DPS-10.5 is now ready for use. See

 

page 41 for information on playing

 

discs.

Notes:

You can change the language of the onscreen setup

 

menus, and specify your preferred languages for DVD

 

menus, soundtracks, and subtitles on the Language

 

menu (see page 77).

When a DVD doesn’t have menus, soundtracks, and

 

subtitles in different languages, its default language is

 

used.

• When the DPS-10.5 is plugged in and set to Standby,

 

it automatically checks if it’s connected to any other

7

Remote controller

Enter

Use the Left and Right []/[ ] buttons to set the Front Speaker setting, and then press the [Enter] button.

Large: Select if the front speakers are large.

Small (default): Select if the front speakers are small.

Note that if the Subwoofer setting is set to Off, this setting is fixed at Large.

i.LINK components. If it is, the default setting for the

i.LINK Output Setting becomes On. If not, the default

becomes Off.

40

Page 40
Image 40
Integra DPS-10.5 instruction manual Initial Setup