Integra DPS-10.5 instruction manual Setting the Speaker Distances, Buttons to select an option

Configuring the DPS-10.5—Continued

5	Use the Up and Down [ ]/[	]
Remote controller	buttons to select Surround
	Speaker, press the [Enter] but-
	ton, use the Left and Right [	]/
Enter	[ ] buttons to select an option,

and then press the [Enter] but- ton.

Large: Select if the surround speakers are large.

Small (default): Select if the surround speakers are small.

Off: Select if no surround speakers are being used.

If the Subwoofer setting is set to Off, only the Large and Off options can be selected.

6	When you’ve finished, press the
	[Setup] button to exit setup, or

Remote controller press the Left [] button repeat-

edly to go back to the main setup menu.

2

Remote controller

Enter

Use the Up and Down []/[ ] buttons to select each speaker, press the [Enter] button, use the Left and Right []/[ ] buttons to specify the distance from each speaker to the listening position, and then press the [Enter] but- ton.

Speaker distances can be specified in steps of 1.0 ft. (0.3 m).

(The North American model displays feet; other models display meters.)

Speaker	Range	Default
Front Left
		12.0 ft.
Center
		(3.6 m)
Front Right
	1.0–30.0 ft.
Surround
	(0.3–9 m)	7.0 ft.
Right
		(2.1 m)
Surround Left
Subwoofer		12.0 ft.
		(3.6 m)

Setting the Speaker Distances

Notes:

• If the distance between the furthest and nearest speakers is greater than 20 feet, corrected values suitable for home theater use will be set automat-

1

Remote controller

Enter

Use the Up and Down []/[ ] buttons to select Speaker Dis- tance, press the [Enter] button, use the Up and Down []/[ ] buttons to select On, and then press [Enter] again.

When the Speaker Distance is set to Off, these settings cannot be selected.

ically.

3	When you’ve finished, press the
	[Setup] button to exit setup, or

Remote controller press the Left [] button repeat-

edly to go back to the main setup menu.

Note:

•The Speaker Distance settings have no effect on SACD (multichannel area and 2-channel area) and 192 kHz/176.4 kHz DVD-Audio.

74