Removal and replacement procedures

Remove the top cover:

1.Turn the computer upside down with the front toward you.

2.Remove the following screws that secure the top cover to the base enclosure: 1 Three Phillips PM2.5×8.0 screws

2 Three Phillips PM2.5×5.0 screws

3 One Phillips PM2.5×3.0 screw

3.Turn the computer right-side up, with the front toward you.

4.Disconnect the following cables from the system board: 1 TouchPad cable

2 Fingerprint Reader board cable (select models only)

3 USB cable

Maintenance and Service Guide

4–35

Page 76 Page 78
Page 77
Image 77
HP DV4 manual Removal and replacement procedures
Page 76 Page 78
Top Page Image Contents