Removal and replacement procedures
10.Release the inverter 1 from the clips in the display enclosure as far as the display panel cable and the backlight cable will allow.
11.Disconnect the display panel cable 2 and the backlight cable 3 from the display inverter. The display inverter is available using spare part number
12.Remove the four Phillips PM2.5×5.0 screws 1 and the four Phillips PM2.5×3.0 screws 2 that secure the display panel to the display enclosure.
13.Lift the display panel 3 out of the display enclosure and disconnect the display panel cable 4. The display panel is available using the spare part number
Maintenance and Service Guide |
