Removal and replacement procedures
17.Replace the wireless antenna transceivers and cables, remove the two Phillips PM2.5×3.0 screws 1 that secure the transceivers to the display enclosure.
18.Detach the wireless antenna transceivers 2 from the display enclosure. The transceivers are secured by a foil wrapping.
19.Remove the wireless antenna transceivers and cables from the clips 3 built into the display enclosure.
20.Remove the wireless antenna transceivers and cables 4 from the display enclosure. The wireless antenna transceivers and cables are available using spare part number
Reverse this procedure to reassemble and install the display assembly.
Maintenance and Service Guide |
