Cisco Systems PI21AG, CB21AG manual Logging for EAP Modules, Configuring and Starting Logging, 4-26

Chapter 4 Performing Administrative Tasks

Logging for EAP Modules

Logging for EAP Modules

To generate logs to assist with troubleshooting, the EAP-FAST, LEAP, and PEAP-GTC modules utilize Windows Event Log Service. The logs include information such as the type of event, the event location, the function that was affected by the event, and the date and time of the event.

The following sections contain information about logging:

•Configuring and Starting Logging, page 4-26

•Disabling Logging and Flushing Internal Buffers, page 4-27

•Locating Log Files, page 4-28

Configuring and Starting Logging

To access the administrator command prompt and to configure and start logging, perform the following steps:

Step 1 Choose Start > All Programs > Accessories.

Step 2 Right-clickCommand Prompt and select Run as administrator.

Step 3 At the prompt, enter the following command to configure and start logging:

•For EAP-FAST

wevtutil sl Cisco-EAP-FAST/Debug /e:true /k:category_mask /l:log_level

•For PEAP-GTC

wevtutil sl Cisco-EAP-PEAP/Debug /e:true /k:category_mask /l:log_level

•For LEAP

wevtutil sl Cisco-EAP-LEAP/Debug /e:true /k:category_mask /l:log_level

	Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide for Windows Vista
4-26	OL-16534-01