Cisco Systems CB21AG Disabling Logging and Flushing Internal Buffers, 4-27, Syntax Description

Chapter 4 Performing Administrative Tasks

Logging for EAP Modules

Syntax Description	category_mask	Bitmask of categories of logging to be turned on. Valid values are as
		follows:
		•	0—logs all categories.
		• 1—logs all messages not falling into the next two categories.
		• 2—logs the flow of function entry and exit points with return code only
			on Verbose log level.
		• 4—logs packet dumps only on Verbose log level.
		The default value is 0.
	log_level	Level of logging to be turned on. Valid values are as follows:
		•	0—all log levels.
		•	1—critical.
		•	2—error.
		•	3—warning.
		•	4—informational.
		•	5—verbose.

The default value is 0.

Note If you must shut down the device on which logging was running before logging finishes, logging resumes after reboot. When logging is started either automatically or manually, however, the logs are cleared.

Disabling Logging and Flushing Internal Buffers

After you have collected the information that you need, the following command stops logging and flushes all internal buffers:

•For EAP-FAST

wevtutil sl Cisco-EAP-FAST/Debug /e:false

•For PEAP-GTC

wevtutil sl Cisco-EAP-PEAP/Debug /e:false

•For LEAP

wevtutil sl Cisco-EAP-LEAP/Debug /e:false

Note You must enter this command before you can analyze the .etl file.

Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide for Windows Vista

OL-16534-01 4-27