Toshiba M40, Satellite FL Inverter Board Replacement Procedures, Installing the FL Inverter Board

4.15 FL Inverter Board 4 Replacement Procedures

Figure 4-38 disconnecting the cables

Installing the FL Inverter Board

Install the FL inverter board according to the following procedures and Figures 4-37 and 4-38.

1.Connect the LCD/FL cable to LCD/FL connecter, and connect the HV cable to HV connecter.

2.Place the LCD module, FL inverter board in the correct position.

3.Fasten the three M2.5x4.5 white flat-head screws to secure the FL inverter board and LCD module.

Satellite M40/M45, TECRA A4, dynabook Vx/4 Maintenance Manual 4-55