Toshiba M40, Satellite manual Removing the MDC Card, Removing the wireless LAN card cover

4 Replacement Procedures 4.1 General

Removing the MDC Card

Remove the MDC Card (Modem Daughter Card) according to the following procedures and Figures 4-8 and 4-9, after checking that the computer is turned off in boot mode.

CAUTION: Remove the MDC card after turning off the computer. If this is violated, the computer or MDC card can be damaged.

1.Turn the computer upside down.

2.Release the wireless LAN card cover securing screw.

3.Remove the wireless LAN card cover.

CAUTION: Do not touch the connectors on the MDC card or in the computer. Contaminated connectors can cause MDC card failures.

Figure 4-8 Removing the wireless LAN card cover

4-20 Satellite M40/M45, TECRA A4, dynabook Vx/4 Maintenance Manual