3.2 Quick Start

3 Diagnostic Programs

User can press any key to exit the program.

3.2.8DMI Write

In addition to reading the DMI information, DMI Write also permits attributes editing and updating: Manufacture, Product Name, Version, Serial Number, UUID and OEM Part Number, etc. The following screen will be displayed:

In this screen, there are two lines which attribute could be edited and updated. The 1st line (the font in yellow with blue background) shows the attribute’s value that is read from the current system and the 2nd line (the font in red with turquoise background) shows the same value as that in the 1st line before user’s editing. User can modify the attribute’s value in the 2nd line and press Enter to confirm the current edition and continue editing the next attribute.

During the editing, user could press F2 to confirm the DMI attribute update or press F4 to ignore the modification. Press ESC to exit the program of DMI Write.

The confirmation screen is as below:

Satellite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance

Manual 9

Page 83
Image 83
Toshiba Satellite, M40 manual DMI Write