January 2000 © TOSHIBA TEC 1 - 1 FC-22 ADJUSTMENT
Classification
Error code
Content
Paper transport jam inside the copier
E01 Paper leading edge not reaching the exit sensor
E02 Paper trailing edge not passing the exit sensor
E03 Paper remaining inside the copier at power ON
EB7 Restart time out error
Paper feeding jam E11 Paper misfeed from the ADU
E12 Paper misfeed from the bypass
E13 Paper misfeed from the 1st cassette
E14 Paper misfeed from the 2nd cassette
E15 Paper misfeed from the 3rd cassette
E16 Paper misfeed from the 4th cassette
E19 Paper misfeed from the LCF
E21 Paper transport jam from the LCF
E22 Paper transport jam from the 1st cassette
E23 Paper transport jam from the 2nd cassette
E24 Paper transport jam from the 3rd cassette
E25 Paper transport jam from the 4th cassette
Cover open jam E41 Front cover opened during copying
E42 Side door opened during copying
E43 ADU unit pulled out during copying
E45 LCF jam access cover opened during copying
E46 Bypass unit opened during copying
E50 Paper not reaching the ADU
E51 Paper not restarting from the ADU stack
E52 Paper not reaching the ADU path sensor
E54 ADU paper transport jam
1. ADJUSTMENT ITEMS

1.1 Error Code List

In this manual, colors are sometimes described using abbreviations as listed below:

Yellow : Y Magenta : M Cyan : C Black : K

While the “CLEAR PAPER” or “CALL SERVICE” symbol is flashing, pressing the [CLEAR] key and

the [8] key on the digital keys at the same time shows one of the following error codes on the copy-

quantity indicator as long as those keys are pressed.

Paper transport jam
(Paper not reaching the registration
sensor after feeding)
Paper jam in ADU and reversing
area