4.1.6Original jam in the RADF

E71 Original not reaching the aligning sensor

E72 Original not reaching the exit sensor

E73 Original not passing the exit sensor

E75 Second original not reaching the aligning sensor in 2-in-1 mode E79 Prefeed jam

[Two or more originals are fed simultaneously.]

Have too many originals been placed?

YES

NO

Reset the originals, following the specification.

Are the original sheets curled or folded too much?

YES

NO

Flatten and reset the originals.

Are different-size originals placed together?

YES

NO

Set only one-size originals.

Is the gap between the aligning plate and the feed roller too large?

YES

NO

Adjust the gap.

Is the separation pad stained?

YES

Clean the separation pad.

FC-22 TROUBLESHOOTING

4 - 10

January 2000 © TOSHIBA TEC

Page 136
Image 136
Toshiba FC-22 manual Have too many originals been placed?