4.1.3Paper transport jam (Paper not reaching the registration sensor after feeding)

E21

E22

E23

E24

E25

Paper transport jam from the LCF

Paper transport jam from the 1st cassette Paper transport jam from the 2nd cassette Paper transport jam from the 3rd cassette Paper transport jam from the 4th cassette

Open the side door; does any paper remain in the paper path up to the registration roller?

YES

NO

Remove the paper.

Is the harness between the LGC board and the cassette-feed jam sensor open-circuited? Is the harness between the LGC board and the registration sensor open-circuited?

Is the cassette-feed jam sensor connector, registration sensor connector, or the connectors J107 or J108 on the LGC board disconnected?

YES

Reconnect the connector. Replace the harness.

 

NO

1.Replace the cassette-feed jam sensor or the registration sensor.

2.Replace the LGC board.

January 2000 © TOSHIBA TEC

4 - 5

FC-22 TROUBLESHOOTING

Page 131
Image 131
Toshiba FC-22 manual Reconnect the connector. Replace the harness