Toshiba FC-22 manual Disposition of Consumable Parts/Packing Materials, Vorsicht

5.Disposition of Consumable Parts/Packing Materials

∙Regarding the recovery and disposal of the copier, supplies, consumable parts and packing materials, it is recommended to follow the relevant local regulations or rules.

6.When parts are disassembled, reassembly is basically the reverse of disassembly unless otherwise noted in this manual or other related documents. Be careful not to reassemble small parts such as screws, washers, pins, E-rings, star washers in the wrong places.

7.Basically, the machine should not be operated with any parts removed or disassembled.

8.Precautions Against Static Electricity

∙The PC board must be stored in an anti-electrostatic bag and handled carefully using a wrist- band, because the ICs on it may become damaged due to static electricity.

Caution: Before using the wristband, pull out the power cord plug of the copier and make sure that there are no uninsulated charged objects in the vicinity.

Caution	:	Dispose of used RAM-ICs (including lithium battery)
		according to the manufacturer’s instructions.
Vorsicht	:	Entsorgung des gebrauchten RAM-ICs (inklusive
		der Lithium-Batterie) nach Angaben des Herstellers.