1. 2 Self Diagnostic Mode

Mode

Input method

Meaning

Clearing

 

 

 

 

Whole control panel light-

[0]+[1]+[POWER]

All control-panel LEDs are lit,

[C] or [POWER]

ing mode

 

and all LCD pixels are turned

OFF/ON

 

 

on/off repeatedly.

 

 

 

 

 

Test mode

[0]+[3]+[POWER]

Input/output signals are

[POWER] OFF/ON

 

 

checked

 

 

 

 

 

Test print mode

[0]+[4]+[POWER]

A test pattern print is made.

[POWER] OFF/ON

 

 

 

 

Adjustment mode

[0]+[5]+[POWER]

Adjustment of various items

[POWER] OFF/ON

 

 

 

 

Setting mode

[0]+[8]+[POWER]

Setting of various items

[POWER] OFF/ON

 

 

 

 

Note: Input method for various modes:

While pressing simultaneously the two digital keys corresponding to the mode you want to set (for example, [0] and [5]), turn on the main switch [POWER].

<Operation procedure>

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CLEAR

0

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(Exit)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(All control-panel LEDs light)

 

 

 

START

 

 

 

(Check Key)

 

 

 

 

CLEAR

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Power

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(Exit)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

START

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Whole control-panel lighting mode (01) :

or

POWER OFF/ON

Notes: 1. During the “Check keys” mode, [CLEAR] alone can do.

During the “Whole control-panel lighting mode”, [CLEAR] can clear the mode.

2. Check keys : Any key with LED (when it is pressed, the LED goes out.)

Any key without LED (When it is pressed, an indication is made in the message area.)

• Test mode (03)

:Refer to Sec. 1.2.1 and 1.2.2 for test modes.

Test print mode (04) : Refer to Sec. 1.2.3 for test print modes.

Adjustment mode (05) : Refer to Sec. 1.2.4 for adjustment modes.

Setting mode (08) : Refer to Sec. 1.2.5 for setting modes.

FC-22 ADJUSTMENT

1 - 6

January 2000 © TOSHIBA TEC

Page 14
Image 14
Toshiba FC-22 manual Self Diagnostic Mode