Toshiba FC-22 manual 269, Radf

				Allowable					Operation
	Code	Name	Default					Contents	procedure
				input value
									group
269		Forced performing of image quality	0	0-1	0: Disabled				1
		control before the use-level calibration			1: Enabled
300		Maximum number of copies	0	0-2	0:999	1:99	2:9		1
		allowed
302		Resettable Copy and Original	UC: 0	0-3	0: Off	1: Resettable Copy counter			1
		counter display	EUR: 3		2: Resettable Original counter
					3: Resettable Copy and Original counters
350		Manually placed original	0		0: Not present;			1: Present	1
		detection
352		Shooting correction process	0		0: Valid;			2: Invalid	1
		setting
353		SALT log table setting	0		0: Normal operation;				1
					1: Forced setting on log table
					(for ACS/full color);
					2: Forced setting on log table
					(for single color/monochrome);
					3: Forced setting on log table (for CCV)
354		HDEN control	0		0: Normal operation;				1
					1: HDEN control operation
355		Sharpness availability setting	1		0: Unavailable;			1: Available	1
360			0	0-1	RADF reversing of transport belt during				1
		Switch back			original transporting, to align originals
					against the original scale.
					0: Disabled		1: Enabled
361		RADF	0	0-1	When non-standard originals are used;				1
		Non-standard size original			0: Non-standard - Machine will stop and
		detection			prompt operator to select copy size.
					1: Standard - Machine continues the cur-
					rent job without stopping
400		Image quality control 1	1	0-1	Auto-performing of image quality control				1
					0: Disabled
					1: Enabled (Performing 08-410,413)

January 2000 © TOSHIBA TEC 1 - 34 -1 FC-22 ADJUSTMENT