January 2000 © TOSHIBA TEC 1 - 23 FC-22 ADJUSTMENT
390 All (Y , M, C, K) – –
391 Color (Y, M, C) – –
392 K – –
400 1222
1209~1235
When the value increases by 1, the
reproduction ratio in the primary
scanning direction (horizontal pa-
per feeding direction) decreases by
approx. 0.082%. (If the values of this
code 400 is changed, the values of
code 05-401, 402, 403, 404 and
474 are optimized.)
401 1355
1327~1382
When the value increases by 1, the
reproduction ratio in the secondary
scanning direction (vertical paper
feeding direction) decreases by
approx. 0.074%. (If the values of this
code 401 is changed, the values of
code 05-401, 402, 403, 404 and
474 are optimized.)
402 Fine adjustment of fuser motor rotation speed 3794 0~65535 When the value increases by 1, the
rotation speed of fuser motor de-
creases by 0.026%.
403 Fine adjustment of drum motor rotation speed 1700 0~65535 When the value increases by 1, the
rotation speed of the drum motors
(Y,M,C,K) decreases by 0.059%.
404 Fine adjustment of feed motor rotation speed 4289 0~65535 When the value increases by 1, the
rotation speed of the paper feed
motor decreases by 0.023%.
406 Feed motor speed adjustment – – The paper transport speed of reg-
istration roller in relation to the im-
age printing speed is set at the op-
timum value. (If the value of this
code 406 is performed, the value
of code 05-404 is optimized.)
407 Color registration control forced performing – – Performs the color registration con-
trol.
408 0 0~20 In this thick paper 3 mode, when
the value is increased by 1, the
fuser motor rotation speed is de-
creased by 0.026%.
Acceptable
Operation
Code
Description/Mode
Default
Value Contents
procedure
group
6
6
6
1
1
1
1
1
6
6
1
Automatic removing of devel-
oper material
Reproduction ratio adjustment of primary scan-
ning direction (Fine adjustment of polygonal
motor rotation speed)
The developer material in the de-
veloper unit is removed into the
toner bag.
Reproduction ratio adjustment of secondary
scanning direction (Fine adjustment of transfer
belt motor rotation speed)
Correction of fuser motor rotation speed in the
thick paper 3 mode