Toshiba FC-22 manual Code Color mode Copy mode Content, AI text area Image becomes, Text Appear

1. 13 Sharpness Adjustment

If you want to make copy images look softer or sharper, perform the following adjustment. The adjustment can be made for each of the color modes and image modes independently.

Code	Color mode	Copy mode		Content
730	Full color	Text/photo (text area)	•	The larger the value, the sharper the image
731		Text/photo (photo area)		becomes; while the smaller the value, the softer the
732		AI (text area)		image becomes.
733		AI (photo area)	•	The smaller the value, the less moire tends to
734		Text		appear.
735		Printed image	•	The permissible range of values : 0 to 31.
736		Photo		The center value is 16.
737		Map		However, 0 is equivalent to the center value.
738	Black	Text/photo (text area)	Note: In the text/photo and AI modes, you can make
789		Text/photo (photo area)		adjustment for text area and photo area
740		AI (text area)		independently, but in the other modes, you
741		AI (photo area)		have to make adjustment by compromising
742		Text		between moire and sharpness.
743		Printed image
744		Photo
745		Map

Make a test copy and compare the image obtained with the current settings; if necessary, make adjust- ment using the following procedure.

<Procedure>

(1)While pressing [0] and [5] simultaneously, turn the power ON.

(2)Input the code of required mode (color mode, copy mode, items to be adjusted) with digital keys and press the [START] key.

(3)Input an adjustment value with digital keys.

(To correct an input value, press the [CLEAR] key.)

(4)Press the [SET] icon or [INTERRUPT] key to store the value in memory.→The copier goes back to the standby state.

(5)Press the [ENERGY SAVER] key and then press the [START] key to make a test copy.

(6)If the desired image density has not been attained, repeat the steps (2) to (5).

January 2000 © TOSHIBA TEC 1 - 73 FC-22 ADJUSTMENT