Toshiba FC-22 manual Sjp

"Code" provides with following information.

A.In the case of Program data("target" is 1), "code" means the destination. SUC: for USA and Canada

SEU: for European countries

SX:	for Australia and Asian countries
SJP:	for Japan
B. In the case of UI data("target" is 2-6), "code" means Language.
		Code	Language	Code	Language
		2	Japanese	13	Finnish
		3	American English	14	Norwegian
		4	English	15	Australian English
		5	reserved	16	Polish
		6	French	17	Czech
		7	German	18	Greek
		8	Swedish	19	Romanian
		9	Dutch	20	Bulgarian
		10	Italian	21	Portuguese
		11	Spanish	22	Hungarian
		12	Danish	23	reserved

5.Select the area for update using ten keys.

Using [1] to [6] keys and [INTERRUPT] key, you can select a target area.

A selected number is displayed at target area. Press [INTERRUPT] to input "#". The relation between target area number and firmware data is as follows.

1 : Program data

2 : Fixed UI data

3 : Common UI data

4 : 1st language UI data

5 : 2nd language UI data

6 : 3rd language UI data

#1 : All data (1, 2, 3, 4, 5 and 6)

#2 : All UI data (2, 3, 4, 5 and 6)

#3 : All language UI data (4, 5 and 6)

6.Press [START] key and copier starts to update the data.

Do not turn OFF the power of the copier or the computer, or disconnect the connection between the copier and computer after pressing the START key.

Interrupting the transmission of a file to the copier will result in corrupting the file in F- ROM of the copier. If this file is corrupted, you have to re-install the data again.

FC-22 FIRMWARE UPDATING 5 - 6 January 2000 © TOSHIBA TEC