Toshiba FC-22 manual Group

				Acceptable		Operation
Code	Description/Mode		Default		Contents	procedure
				Value		group
200	Automatic filling of developer	All (Y, M, C, K)	–	0~255	After filling the developer from the de-	5
					veloper cartridge (approx. 2.5min.),
201	material and automatic ad-	Y	–	0~255		5
202	justment of the auto-toner cir-	M	–	0~255	auto-toner sensor output is adjusted	5
					(approx. 2min.) to set in the range of
203	cuit	C	–	0~255		5
					4.00-4.33V. (As the value increases,
204		K	–	0~255		5
					the sensor output increases.)
221		Color (Y, M, C)	–	0~255		5
213	Auto toner output value		0	0~1023	Auto toner output value is displayed.	10
223	Developer bias DC (–)	Y	130	0~255	As the value increases, the transformer	1
224	output adjustment	M	130	0~255	output increases. The adjustment value	1
225		C	130	0~255	becomes effective only when the setting	1
226		K	125	0~255	mode (08-400, 401, 409) is 0 (disabled).	1
241	Main charger grid bias	Y	120	0~255	As the value increases, the transformer	1
242	output adjustment	M	120	0~255	output increases. The adjustment value	1
243		C	120	0~255	becomes effective only when the setting	1
244		K	116	0~255	mode (08-400, 401, 409) is 0 (disabled).	1
245	Automatic adjustment of the	All	–	0~255	Auto-toner sensor output is	5
	auto-toner circuit				adjusted (approx. 2 min.) to set
	(Without automatic filling of	(C, M, Y, K)			in the range of 4.00~4.33V. (As
	developer material)				the value increases, the sensor
					output increases.)
246		Y	–	0~255
247		M	–	0~255
248		C	–	0~255
249		K	–	0~255
250		Color	–	0~255
		(Y, M, C)
252-0	Main charger bias	Y	250	0~999	Actual output voltage of main	4
252-1	output voltage 1 (lower)	M	250	0~999	charger grid bias. After replacing	4
252-2		C	250	0~999	the main high-voltage transformer,	4
252-3		K	250	0~999	input the value according to the	4
253-0	Main charger bias	Y	900	0~999	supplementary data sheet.	4
253-1	output voltage 2 (upper)	M	900	0~999		4
253-2		C	900	0~999		4
253-3		K	900	0~999		4
257-0	Developer bias DC (–)	Y	100	0~999	Actual output voltage of developer	4
257-1	output voltage 1 (lower)	M	100	0~999	bias. After replacing the main high-	4
257-2		C	100	0~999	voltage transformer, input the value	4
257-3		K	100	0~999	according to the supplementary	4
258-0	Developer bias DC (–)	Y	700	0~999	data sheet.	4
258-1	output voltage 2 (upper)	M	700	0~999		4
258-2		C	700	0~999		4
258-3		K	700	0~999		4

January 2000 © TOSHIBA TEC 1 - 21 FC-22 ADJUSTMENT