FC-22 ADJUSTMENT 1 - 70 January 2000 © TOSHIBA TEC
Copy mode
Color Text/photo Text Printed Photo Map Item to be adjusted Remarks
mode image
698 699 700 701 702
708 709 710 711 712
703 704 705 706 707
713 714 715 716 717
Full color
The
larger the value, the darker
the background becomes.
The smaller the value, the
darker the text becomes.
The larger the value, the darker
the background becomes.
The smaller the value, the
darker the text becomes.
Offset value for
background
Offset value for
text
Offset value for
background
Offset value for
text
Black
1. 10 Offset Amount for Processing Background
The density of background and text can be adjusted as follows.
Make a test copy and compare the image obtained with the current settings; if necessary, make adjust-
ment using the following procedure.
<Procedure>
(1) While pressing [0] and [5] simultaneously, turn the power ON.
(2) Input the code of required mode (color mode, copy mode, item to be adjusted) with digital keys and
press the [START] key.
(3) Input an adjustment value with digital keys.
(To correct an input value, press the [CLEAR] key.)
(4) Press the [SET] icon or [INTERRUPT] key to store the value in memory.
→
The copier goes back to
the standby screen.
(5) Press the [ENERGY SAVER] key and then press the [START] key to make a test copy.
(6) If the desired image density has not been attained, repeat the steps (2) to (5).