Toshiba FC-22 manual AI Mode Setting

1. 12 AI Mode Setting

(a)AI mode discrimination setting

Select the discrimination level in the AI mode as follows:

Code	Adjustment item			Content
678	AI mode	<Procedure>
	Discrimination setting	(1) While pressing [0] and [5] simultaneously, turn ON the
			power.
		(2)	Input code [678] with digital keys.
		(3)	Input an appropriate setting value:
			0	: Standard (for regular)
			1	: Photograph priority
			2	: Only judgement of original type
			3	: Only judgement of original type with photograph pri-
				ority
			4	: No AI discrimination
		(4)	Press [SET] icon or the [INTERRUPT] key to store the
			adjustment value.

(b)AI mode time-out setting

Set the maximum processing time allowable during the AI mode. Two kinds of setting are made, one for originals of A4 or smaller sizes, and the other for originals larger than A4.

Note: In case discrimination does not finish, stop AI mode discrimination and copy in the selected copy mode.

Code	Adjustment item		Content
682	AI mode	<Procedure>
	Time-out setting	(1)	While pressing [0] and [5] simultaneously, turn ON the
			power.
		(2)	Input code [682] with digital keys.
		(3)	Input an appropriate setting value:
			The setting value should be two digits; the lower digit is
			the time-out period (seconds) for A4 original size, and
			should be in the range of 1 to 9. The upper digit is the
			time-out period for A3 original size, and should be in the
			range of 1 to 9. However, time is set in proportion to
			original sizes for originals larger than A4, based on A4
			or A3 setting value.
		(4)	Press [SET] icon or the [INTERRUPT] key to store the
			setting value.

FC-22 ADJUSTMENT 1 - 72 January 2000 © TOSHIBA TEC