1. 8 Density Adjustment

The center density and the density variation controlled by density adjustment keys can be adjusted

as follows.

 

 

 

Copy mode

 

 

 

 

 

 

 

 

 

 

 

Items to be adjusted

Remarks

Color

Text/photo

Text

 

Printed

Photo

Map

 

 

 

mode

 

image

 

 

 

 

 

 

 

 

 

 

 

 

550

551

 

552

553

554

Manual-density

The larger the value, the

 

 

center value

darker the image becomes.

color

 

 

 

 

 

 

 

 

 

 

 

 

 

 

560

561

 

562

563

564

Manual-density

The larger the value, the darker

Full

 

“dark” step value

the “dark” side becomes.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

570

571

 

572

573

574

Manual-density

The larger the value, the lighter

 

 

“light” step value

the “light” side becomes.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

580

581

 

582

583

584

Automatic density

The larger the value, the

 

 

darker the image becomes.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

555

556

 

557

558

559

Manual-density

The larger the value, the

 

 

center value

darker the image becomes.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

565

566

 

567

568

569

Manual-density

The larger the value, the darker

Black

 

“dark” step value

the “dark” side becomes.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

575

576

 

577

578

579

Manual-density

The larger the value, the lighter

 

 

 

 

“light” step value

the “light” side becomes.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

585

586

 

587

588

589

Automatic density

The larger the value, the

 

 

darker the image becomes.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Make a test copy and compare the image obtained with the current settings; if necessary, make adjust- ment using the following procedure.

<Procedure>

(1)While pressing [0] and [5] simultaneously, turn the power ON.

(2)Input the code of required mode (color mode, copy mode, item to be adjusted) with digital keys and press the [START] key.

(3)Input an adjustment value with digital keys (acceptable values: 0 to 255). (To correct an input value, press the [CLEAR] key.)

(4)Press the [SET] icon or [INTERRUPT] key to store the value.The copier goes back to the standby state.

(5)Press the [ENERGY SAVER] key and then press the [START] key to make a test copy.

(6)If the desired image density has not been attained, repeat the steps (2) to (5).

FC-22 ADJUSTMENT

1 - 68

January 2000 © TOSHIBA TEC

Page 86
Image 86
Toshiba FC-22 manual Remarks, 550 551, Manual-density, Full Dark step value Dark side becomes 570 571