Toshiba manual FC-22 Adjustment

(c) Reproduction ratio adjustment of secondary scanning direction (Fine adjustment of transfer belt mo- tor rotation speed)

1.While pressing the digital keys [0] and [5] simultaneously, turn ON the power.→(Adjustment mode)

2.Press [1]→[SETTINGS]. (A grid pattern illustrated later is printed out. Use A3 (LD) from the 2nd cassette.)

3.Measure the distance C from the 6th to 26th grid lines of the grid pattern.

4.Check if the distance C is within 200 ± 0.5 mm or not.

5.If it is not, use the following procedure to change values and repeat the steps 2 to 4 above.

<Procedure>	(Adjustment mode)→(Input code [401] with digital keys)→[START]→(Input a value (ac-
	ceptable values: 1327 to 1382) with digital keys)→[SET] icon or [INTERRUPT] key
	(Stored in memory).→(Input code [407] with digital keys)→[START]→Color registration
	control forced performing
	*The larger the adjustment value, the shorter the distance C becomes (0.074 %/step =

0.15mm/step).

(d)Secondary-scanning data write start position adjustment

1.While pressing the digital keys [0] and [5] simultaneously, turn ON the power.→(Adjustment mode)

2.Press [1]→[SETTINGS]. (The following grid pattern is printed out. Use A3 (LD) from the 2nd cassette.)

3.Measure the distance D from the leading edge of the paper to the 6th grid line of the grid pattern.

4.Check if the distance D is within 55 ± 0.5 mm or not.

5.If it is not, use the following procedure to change values and repeat the steps 2. to 4. above.

<Procedure>	(Adjustment mode)→(Input code [474] with digital keys)→[START]→(Input a value (ac-
	ceptable values: 0 to 15) with digital keys)→[SET] icon or [INTERRUPT] key (Stored in
	memory).→(Input code [407] with digital keys)→[START]→Color registration control
	forced performing
	*The larger the adjustment value, the shorter the distance D becomes (0.6 mm/step).

Note: The reproduction ratio adjustment and the data write start position adjustment in the primary and secondary scanning directions have a connection as shown below.

1.When [05-400] is adjusted, [05-401, 402, 403, 404 and 474] are automatically adjusted.

2.When [05-401] is adjusted, [05-402, 403, 404 and 474] are automatically adjusted.

3.When [05-406] is adjusted, [05-404] is automatically adjusted.

FC-22 ADJUSTMENT 1 - 56 January 2000 © TOSHIBA TEC