Toshiba FC-22 manual Application Method of the Adhesive for Screw Locking

Step 2

In case of C:

Tighten the mirror-1 adjustment screw (CW).

→Normal image

In case of D:

Loosen the mirror-1 adjustment screw (CCW).

→Normal image

Note: After the image distortion adjustment, when the adjustment screws of the mirror 1 and 2 are turned, lock the adjustment screws us- ing the screw locking agent “BOND-1324”.

[Application Method of the Adhesive for the

Screw Locking]

(1)Adjust the image distortion.

(2)Remove the original glass and the indicator unit.

(3)Move the carriage 1 toward the paper exit side.

(4)Apply the adhesive (BOND-1324) to the adjust- ment screws of carriage 1 and 2.

Mirror-1

Note: Application Method

*Apply good quantity of the adhesive to the “Ap-

plication area”.

*The adhesive needs 12 hours to harden com-

pletely.

(5)Confirm that there is no dust or stain on the mir- ror 1, 2 or 3 or the shading correction plate.

(6)Install the indicator unit and the original glass.

Application area

Carriage frame

Mirror

January 2000 © TOSHIBA TEC 1 - 59 FC-22 ADJUSTMENT