FC-22 ADJUSTMENT 1 - 24 January 2000 © TOSHIBA TEC
427 Right margin 160 0~255 Pr inted page right edge void (mar-
gin) adjustment. When the value in-
creases by 1, the void in the right
side of paper feed direction (rear
side) decreases by approx.
0.042mm.
428 Bottom margin 160 0~255 Printed page trailing edge void
(margin) adjustment. When the
value increases by 1mm, the void
in the trailing edge of paper feed
direction decreases by approx.
0.042mm.
439 1st 25 0~40
440 cassette 25 0~40
441 2nd 25 0~40
442 cassette 25 0~40
443 3rd Long size 25 0~40
444 cassette Short size 25 0~40
445 4th Long size 25 0~40
446 cassette Short size 25 0~40
447 ADU Long size 25 0~40
448 Short size 25 0~40
449 LCF 18 0~40
450 Bypass feed 35 0~40
451 Thick paper 2 mode 35 0~50
452 Thick paper 3 mode 35 0~50
461 Color registration status display 0 0~255 The value of Y (0) shows the status
of color registration sensor error. 0
or 16 or above: Normal
1-14:
Data abnormal (sensor normal)
15: Color registration pattern reading error
470 K 100 0~255 When the value increases by 1, the
image shifts by approx. 0.042mm
toward the right side of paper feed
direction.
474 8 1~15 When the value increases by 1, the
image shifts by approx. 0.6mm to-
ward the leading edge of paper feed
direction.
Acceptable
Operation
Code
Description/Mode
Default
Value Contents
procedure
group
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
10
1
1
Long size
Short size
Long size
Short size
Paper alignment
(paper buckle) at
the main registra-
tion roller
When the value increases by 1,
the aligning (paper buckle)
increases by approx. 0.8mm.
*Long size:
Paper length 330 mm and longer
(A3/LD/A3 wide)
Short size:
Paper length 220 mm to 329 mm
Primary-scanning data write start position
adjustment
Secondary-scanning data write start position ad-
justment (Printer and Test print mode)