Toshiba manual Preventive Maintenance Checklist, Symbols used in the checklist For FC-22

2. 2 Maintenance to be Performed

FC-22: Every 30,000, 60,000, 90,000 and 120,000 Copies

FC-15: Every 20,000, 40,000, 60,000 and 120,000 Copies

(1)Preparation

1Discuss current machine conditions with the key operator and note them down.

2Before starting maintenance, make a few sample copies by TCC-1 chart and save them for later reference purposes.

3Turn OFF the power switch, and be sure to unplug the copier.

(2)Perform preventive maintenance following the checklist shown below. During maintenance, refer to the illustrations attached and the Service Manual as required.

(3)After having finished the maintenance, plug in the copier, turn ON the power switch, and make a few copies to confirm that the copier is working normally.

2. 3 Preventive Maintenance Checklist

Symbols used in the checklist (For FC-22)

Cleaning		Coating		Replacing	Operation check	Date
A Cleaning with alcohol	W	White grease	30	Every 30K copies	Z After cleaning	User’s name
Z Cleaning with soft pad,		(Molycoat)	60	Every 60K copies	or replacing,	Serial No.
	AV	Alvania No.2	90	Every 90K copies
cloth or vacuum cleaner					check for no	Inspector’s
			120	Every 120K	abnormality.	name
				copies
						Remarks
			>	Replace if
				deformed or
				damaged

Symbols used in the checklist (For FC-15)

Cleaning		Coating		Replacing	Operation check	Date
A Cleaning with alcohol	W	White grease	20	Every 20K copies	Z After cleaning	User’s name
		(Molycoat)	40	Every 40K copies
Z Cleaning with soft pad,					or replacing,	Serial No.
	AV	Alvania No.2	60	Every 60K copies
cloth or vacuum cleaner					check for no	Inspector’s
			120	Every 120K copies	abnormality.	name
			>	Replace if
						Remarks
				deformed or
				damaged

FC-22 PREVENTIVE MAINTENANCE 2 - 2 January 2000 © TOSHIBA TEC