OPERATION

TO MOVE FORWARD AND BACKWARD (See Fig. 7)

The direction and speed of movement is controlled by the forward and reverse drive pedals.

•Start tractor and release parking brake.

•Slowly depress forward (K) or reverse (L) drive pedal to begin movement. Ground speed increases the further down the pedal is depressed.

TO USE CRUISE CONTROL -J (See Fig. 7)

The cruise control feature can be used for forward travel only.

J

K

L

FIG. 7

SYSTEM CHARACTERISTICS

The cruise control should only be used while mowing or transporting on relatively smooth, straight surfaces. Other conditions such as trimming at slow speeds may cause the cruise control to disengage. Do not use the cruise control on slopes, rough terrian or while trimmimg or turning.

•With forward drive pedal depressed to desired speed, pull cruise control lever (J) up and hold while lifting your foot off the pedal, then release the lever.

To disengage the cruise control, depress the brake pedal or tap on forward drive pedal.

TO ADJUST MOWER CUTTING HEIGHT (See Fig. 8)

The position of the attachment lift lever (A) determines the cutting height.

A

T

FIG. 8

•Put attachment lift lever in desired cutting height slot.

•Slide pointer tab (T) to desired cutting height as a reminder for next time you mow.

The cutting height range is approximately 1" to 4". The heights are measured from the ground to the blade tip with the engine not running. These heights are approximate and may vary depending upon soil conditions, height of grass and types of grass being mowed.

•The average lawn should be cut to approximately 2-1/2 inches during the cool season and to over 3 inches during hot months. For healthier and better looking lawns, mow often and after moderate growth.

•For best cutting performance, grass over 6 inches in height should be mowed twice. Make the first cut relatively high; the second to desired height.

TO ADJUST GAUGE WHEELS (See Fig. 9)

Gauge wheels are properly adjusted when they are slightly off the ground when mower is at the desired cutting height in operating position. Gauge wheels then keep the deck in proper position to help prevent scalping in most terrain conditions.

NOTE: Adjust gauge wheels with tractor on a flat level surface.

•Adjust mower to desired cutting height (See “TO AD- JUST MOWER CUTTING HEIGHT” in this section of manual).

•With mower in desired height of cut position, gauge wheels should be assembled so they are slightly off the ground. Install gauge wheel in appropriate hole. Tighten securely.

•Repeat for all, installing gauge wheel in same adjust- ment hole.

FIG.9

TO OPERATE MOWER

Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine. You must remain fully and centrally positioned in the seat to prevent the engine from hesitating or cutting off when operating your equipment on rough, rolling terrain or hills.

•Select desired height of cut with attachment lift lever.

•Start mower blades by engaging attachment clutch control.

TO STOP MOWER BLADES - disengage attachment clutch control.

CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped, or the deflector shield (S) in place.

10

Page 9 Page 11
Page 10
Image 10
Poulan CO20H46YT To Move Forward and Backward See Fig, To USE Cruise Control -J See Fig, To Adjust Gauge Wheels See Fig
Page 9 Page 11

CO20H46YT specifications

The Poulan CO20H46YT is a powerful riding lawn mower designed to provide a reliable and efficient mowing experience for homeowners with medium to large lawns. This impressive machine comes with a variety of features and technologies that enhance its performance, comfort, and ease of use.

At the heart of the Poulan CO20H46YT is a robust 20HP Briggs & Stratton engine, known for its durability and high performance. This engine delivers ample power to tackle thick grass and uneven terrain, ensuring that mowing is completed quickly and efficiently. Coupled with a hydrostatic transmission, the mower offers smooth and precise control, allowing users to adjust speed effortlessly while navigating around obstacles.

One of the standout features of the Poulan CO20H46YT is its 46-inch cutting deck. This wide cutting deck allows for a larger mowing area with each pass, reducing the overall time spent mowing. The deck is equipped with a system that enables users to easily adjust the cutting height, accommodating various grass types and mowing preferences. With several height settings available, homeowners can achieve the perfect lawn finish.

Furthermore, the mower incorporates an innovative air induction technology, which enhances airflow throughout the deck. This ensures a clean cut and contributes to a healthier lawn by promoting even grass growth. The blades are designed to give a precise cut while also effectively mulching the grass for improved nutrient recycling.

Comfort and ease of operation are also central to the design of the Poulan CO20H46YT. The ergonomic seat and steering wheel provide a comfortable driving experience, allowing users to mow for extended periods without discomfort. Additionally, the ride-on mower features an easy-to-use control panel, making it simple to operate the various settings.

Another important characteristic of the CO20H46YT is its sturdy construction. Built to withstand the rigors of frequent use, the mower features a durable frame and high-quality components, ensuring longevity and reliability. Regular maintenance is made easier with accessible engine parts, allowing users to keep their mower in peak condition.

In summary, the Poulan CO20H46YT combines power, efficiency, and comfort, making it an excellent choice for homeowners seeking a quality riding lawn mower. With its robust engine, adjustable cutting deck, advanced technologies, and user-friendly design, it is well-equipped to handle the demands of lawn care, delivering exceptional results every time.
Top Page Image Contents