SERVICE AND ADJUSTMENTS

REPLACING BATTERY (See Fig. 30 and 31)

WARNING: Do not short battery ter- minals by allowing a wrench or any other object to contact both terminals at the same time. Before connect- ing battery, remove metal bracelets, wristwatch bands, rings, etc. Positive terminal must be connected first to prevent sparking from acci- dental grounding.

Lift seat pan to raised position.

Disconnect BLACK battery cable first then RED battery cable and carefully remove battery from tractor.

Install new battery with terminals in same position as old battery.

First connect RED battery cable to positive (+) terminal with hex bolt and keps nut as shown. Tighten securely. Slide terminal cover over terminal.

Connect BLACK grounding cable to negative (-) ter- minal with remaining hex bolt and keps nut. Tighten securely.

SEAT PAN

02602

FIG. 30

TERMINAL

KEPS

NUT

COVER

 

HEX

BOLT

02603

 

POSITIVE (RED)

NEGATIVE

CABLE

(BLACK) CABLE

 

FIG. 31

TO REPLACE HEADLIGHT BULB

Raise hood.

Pull bulb holder out of the hole in the backside of the grill.

Replace bulb in holder and push bulb holder securely back into the hole in the backside of the grill.

Close hood.

INTERLOCKS AND RELAYS

Loose or damaged wiring may cause your tractor to run poorly, stop running, or prevent it from starting.

Check wiring. See electrical wiring diagram in the Repair Parts section.

TO REPLACE FUSE

Replace with 20 amp automotive-type plug-in fuse. The fuse holder is located behind the dash.

TO REMOVE HOOD AND GRILL ASSEMBLY (See Fig. 32)

Raise hood.

Unsnap headlight wire connector.

Stand in front of tractor. Grasp hood at sides, tilt toward engine and lift off of tractor.

To replace, reverse above procedure.

HOOD

HEADLIGHT

WIRE

CONNECTOR

03075

FIG. 32

ENGINE

TO ADJUST THROTTLE CONTROL CABLE

The throttle control has been preset at the factory and adjustment should not be necessary. If adjustment is nec- essary, see engine manual.

TO ADJUST CHOKE CONTROL

The choke control has been preset at the factory and ad- justment should not be necessary. If adjustment is neces- sary, see engne manual.

TO ADJUST CARBURETOR

Your carburetor is not adjustable. If your engine does not operate properly due to suspected carburetor problems, take your tractor to an authorized service center for repair

23and/or adjustment.

Page 23
Image 23
Poulan CO20H46YT manual To Replace Headlight Bulb, Interlocks and Relays, To Replace Fuse, To Adjust Throttle Control Cable

CO20H46YT specifications

The Poulan CO20H46YT is a powerful riding lawn mower designed to provide a reliable and efficient mowing experience for homeowners with medium to large lawns. This impressive machine comes with a variety of features and technologies that enhance its performance, comfort, and ease of use.

At the heart of the Poulan CO20H46YT is a robust 20HP Briggs & Stratton engine, known for its durability and high performance. This engine delivers ample power to tackle thick grass and uneven terrain, ensuring that mowing is completed quickly and efficiently. Coupled with a hydrostatic transmission, the mower offers smooth and precise control, allowing users to adjust speed effortlessly while navigating around obstacles.

One of the standout features of the Poulan CO20H46YT is its 46-inch cutting deck. This wide cutting deck allows for a larger mowing area with each pass, reducing the overall time spent mowing. The deck is equipped with a system that enables users to easily adjust the cutting height, accommodating various grass types and mowing preferences. With several height settings available, homeowners can achieve the perfect lawn finish.

Furthermore, the mower incorporates an innovative air induction technology, which enhances airflow throughout the deck. This ensures a clean cut and contributes to a healthier lawn by promoting even grass growth. The blades are designed to give a precise cut while also effectively mulching the grass for improved nutrient recycling.

Comfort and ease of operation are also central to the design of the Poulan CO20H46YT. The ergonomic seat and steering wheel provide a comfortable driving experience, allowing users to mow for extended periods without discomfort. Additionally, the ride-on mower features an easy-to-use control panel, making it simple to operate the various settings.

Another important characteristic of the CO20H46YT is its sturdy construction. Built to withstand the rigors of frequent use, the mower features a durable frame and high-quality components, ensuring longevity and reliability. Regular maintenance is made easier with accessible engine parts, allowing users to keep their mower in peak condition.

In summary, the Poulan CO20H46YT combines power, efficiency, and comfort, making it an excellent choice for homeowners seeking a quality riding lawn mower. With its robust engine, adjustable cutting deck, advanced technologies, and user-friendly design, it is well-equipped to handle the demands of lawn care, delivering exceptional results every time.