......SERVICE AND ADJUSTMENTS

ENGINE SPEED

CAUTION: ENGINE SPEED WAS PROPERLY AD- JUSTED AT THE FACTORY AND SHOULD RE-

QUIRE NO ADDITIONAL ADJUSTMENT. DO NOT

ATTEMPT TO CHANGE ENGINE SPEED. IF YOU BELIEVE THE ENGINE ISRUNNING TOO FAST OR

TOO SLOW, TAKE YOUR GENERATOR TO AUTHORIZED SERVICE (3ENTER FOR REPAIR AND ADJUSTMENT. CHANGING ENGINE GOV- ERNED SPEED WILLVOIDrENG1NE WARRANTY.

Your generator runs at a constant speed. This constant operating speed is maintained by a mechanical, flyv_ight type, fixed speed governor._ DO NOT try to adjust the governed speed setlJngfor the following reasons:

High engine speeds are dangerous and increase the risk of personal injury or damage to equipment,

Lowengine speeds impose a heavy load on the engine when sufficient engine power is not available and may shorten engine life.

oThe generator will supply correct rated AC frequenm¢ and voltage onlyatthe proper speed. Some connected electrical devices could be damaged by incorrect fre- que ncy andior voltage.

ADJUSTING THE CARBURETOR

The carburetor of your generator set is preset atthe factory. DO NOT TAMPER WITH THE CARBURETOR as this will

void the warranty for the emission con_'olsystem. If your generator is to be used at an altitude above 5,000 feet, consult with a Sears Authorized Service Facility regarding high altitude jet_ng changes.

STORAGE

The generator should be stared at least once every seven days and allowad to run at least 30 minutes. If this cannot be done and you must store the unit for more than 30days, use me following information as a guide to prepare it for

storage.

STORAG E INSTR UCTIONS

WARNING: NEVER STORE ENGINE WITH FUEL tN

THE TANK INDOORS OR IN ENCLOSED, POORLY

VENTILATED AREAS, WHERE FUMES CAN REACH AN OPEN FLAME SPARK OR PILOT LIGHT

AS ON A FURNACE, WATER HEATER, CLOTHES DRYER OR OTHER GAS FURNACE,

ENGINE

Run engine for about five minutes to warm it.

NOTE: lfyou did use "gasohol," drain fuel tank, then run engine until engine stops from lack of fuel.

Ait TAINER OUTDOORS, AWAY FROM OPEN FLAME.

I A WARNING: DRAIN FUEL INTO APPROVED CON- BE SURE ENGINE IS COOL.

®

NOTE: Using a fuel additive such as Sears Craftsman Fuel Stabilizer, or an equivalent, will prevent gum deposits from forming in _e generator's fiJel system.

oWhile engine is still warm° drain oil from crankcase. Refill with fresh oil. See BEFORE STARTING EN- GINE on Page 5 for oil recommendations.

Remove spark plug and pour about I ounce (30ml) of engine oil into cylinder, Crank slov_y to distIibute oil.

CAUTION: AVOID SPRAY FROM SPARK PLUG HOLE WHEN CRANKING ENGINE SLOWLY.

Install spark plug. Do not connect spark plug wire.

oClean dirt, oil and grease from cylinder, cylinder head, fins, blower housing, rotating screen and muffler area.

GE NE RATOR

=Clean the generator as outlined on Page 7 (_Fo Clean the Generator').

Check that cooling air slots and openings on generator are open and unobstructed.

OTHER STORAGE TIPS

DO not store gasoline from one season to another.

eReplace your gasoline can if it starts to rust. Rust and/or dirt in your gasoline can cause problems when you use it with this unit.

o Store in clean and dry area.

DANGER; STORAGE COVER IS FLAMMABLE. DO NOT PLACE THE STORAGE COVER OVER A HOT GENERATOR. LETTHE UNIT COOL FOR A SUFFI- CIENT TIME BEFORE PLACING THE COVER ON

THE UNIT. tF YOU PLACE THE COVER ON THE

UN1T BEFOREGENERATOR ISCOOL,THE COVER COULD START ON FIRE.

9

Page 11
Image 11
Craftsman 580.32727 owner manual Service and Adjustments, Storage, Engine Speed, Adjusting the Carburetor

580.32727 specifications

The Craftsman 580.32727 is a powerful and efficient tool designed for the modern homeowner and DIY enthusiast. This versatile piece of equipment is known for its ability to handle a variety of tasks, making it an invaluable addition to any toolkit.

One of the standout features of the Craftsman 580.32727 is its powerful engine. Equipped with a robust and reliable motor, it delivers impressive performance across a wide range of applications, including lawn maintenance, landscaping, and outdoor cleaning. The engine’s efficiency ensures that users can complete their projects quickly and effectively, without having to compromise on power.

Another significant technology integrated into this tool is the ergonomic design. The Craftsman 580.32727 has been thoughtfully engineered with user comfort in mind. Its lightweight structure and comfortable grip allow for extended usage without causing strain or fatigue. This makes it an excellent option for both seasoned professionals and casual users.

The Craftsman 580.32727 also boasts a range of adjustable settings, allowing users to tailor its operation to their specific needs. From varying speed controls to adjustable nozzles, this tool is designed to provide versatility and adaptability for a multitude of tasks. Whether you’re tackling stubborn debris or performing delicate cleaning, the Craftsman 580.32727 can adapt to deliver optimal results.

Durability is another characteristic that sets the Craftsman 580.32727 apart from its competitors. Built with high-quality materials, this tool is designed to withstand the rigors of frequent use. Its sturdiness ensures that it remains a reliable partner for all your outdoor projects, making it a worthwhile investment over time.

The Craftsman brand is synonymous with quality and innovation, and the 580.32727 exemplifies these values. With features like easy assembly and simple maintenance requirements, users can enjoy a hassle-free experience. This tool is not only built for performance but also for user convenience, making it a favorite among DIYers.

In summary, the Craftsman 580.32727 is a complete package of power, comfort, and durability. Its cutting-edge technologies and thoughtful design make it an excellent choice for anyone looking to enhance their outdoor toolkit. Whether you are working on large landscaping projects or smaller cleaning tasks, this tool is an admirable ally in achieving your goals efficiently and effectively.