Craftsman 917.27582 owner manual VER Neutral Adjustment, Transmission Removal Replacement, Ment

Models: 917.27582

1 56
Download 56 pages 25.19 Kb
Page 26
Image 26

Engine Pulley

____

Clutching

--I\

Stationary

_[----_,-i _ I

 

II

Center Span

II__--J--.[

Keeper.-------_

_

Transmission

II__P_L

Input Pulley/_

TRANSAXLE MOTION CONTROL LE-

VER NEUTRAL ADJUSTMENT

The motion control lever has been preset at the factory and adjustment should not be necessary.

1.Loosen adjustment bolt in front of the right rear wheel and lightly tighten.

2.Start engine and move motion con- trol lever until tractor does not move forward or backward.

3.Hold motion control lever in that posi- tion and turn engine off.

4.While holding motion control lever in place, loosen the adjustment bolt.

5.Move motion control lever to the neu- tral (N) (lock gate) position.

6.Tighten adjustment bolt securely. NOTE: If additional clearance is needed

to get to adjustment bolt, move mower deck height to the lowest position.

After above adjustment is made, if the

tractor still creeps forward or backward while motion control lever is in neutral

position, follow these steps:

1.Loosen the adjustment bolt.

2.Move the motion control lever 1/4 to 1/2 inch in the direction it is trying to creep.

3.Tighten adjustment bolt securely.

4.Start engine and test.

5.If tractor still creeps, repeat above steps until satisfied.

Motion Control

LeverLock

Gate

Adjustment

Bolt

TRANSMISSION REMOVAL/

REPLACEMENT

Should your transmission require removal for service or replacement, it should be purged after reinstallation and before operating the

tractor. See "PURGE TRANSMISSION" in the Operation section of this manual.

TO ADJUST STEERING WHEEL ALIGN-

MENT

If steering wheel crossbars are not horizontal (left to right) when wheels are positioned straight forward, remove steer- ing wheel and reassemble with crossbars horizontal. Tighten securely.

FRONT WHEEL TOE-IN/CAM BER

The front wheel toe-in and camber are not

adjustable on your tractor. If damage has occurred to affect the front wheel toe-in or

camber, contact a Sears or other qualified service center.

TO REMOVE WHEEL FOR REPAIRS

1.Block up axle securely.

2.Remove axle cover, retaining ring and washers to allow wheel removal (rear wheels have a square key - Do not lose).

3.Repair tire and reassemble.

NOTE: On rear wheels only: align

grooves in rear wheel hub and axle. Insert square key.

4.Replace washers and snap retaining ring securely in axle groove.

5.Replace axle cover.

NOTE: To seal tire punctures and prevent

flat tires due to slow leaks, purchase and use tire sealant from Sears. Tire sealant

also prevents tire dry rot and corrosion.

Washers

Retaining Ring

Axle Cover

TO START ENGINE WITH A WEAK BAT- TERY

,_WARNING: Lead-acid batteries gen- erate explosive gases. Keep sparks, flame and smoking materials away from bat-

teries. Always wear eye protection when around batteries.

If your battery is too weak to start the engine, it should be recharged. (See "BAT-

TERY" in the MAINTENANCE section of

26this manual).

Page 26
Image 26
Craftsman 917.27582 VER Neutral Adjustment, Transmission Removal Replacement, Ment, To Remove Wheel for Repairs

917.27582 specifications

The Craftsman 917.27582 is a standout machine in the realm of lawn tractors, known for its reliability and robust performance. This model is particularly favored by homeowners looking for a powerful, efficient, and user-friendly solution for lawn care, capable of handling a variety of landscaping tasks with ease.

One of the defining features of the Craftsman 917.27582 is its powerful engine. Equipped with a 19.5 horsepower Briggs & Stratton engine, it delivers reliable power that facilitates optimal cutting performance, making it suitable for tackling medium to large-sized lawns. The automatic transmission allows for smooth and effortless operation, enabling users to navigate through various terrains without the hassle of manual shifting.

The cutting deck of the Craftsman 917.27582 is another highlight, featuring a durable 42-inch deck width. This size not only allows for efficient mowing but also ensures that larger areas can be covered in less time. The deck is designed with a sturdy construction that withstands wear and tear, making it ideal for regular use. Additionally, the deck's six different cutting height adjustments permit customization based on the type of grass and current weather conditions, allowing users to achieve a tailored lawn care routine.

Comfort and ease of use are at the forefront of the Craftsman 917.27582's design. The oversized high-back seat provides ample cushioning and support, perfect for those extended mowing sessions. The user-friendly controls are intuitively placed, making it straightforward for operators to adjust settings without distraction.

Another notable characteristic is the integrated mulching capability, allowing users to maintain a healthy lawn by returning nutrients back into the soil. This feature minimizes lawn waste while promoting vigorous grass growth, a boon for eco-conscious gardeners.

The Craftsman 917.27582 also boasts functional storage options and a tiller attachment, enhancing its versatility. With its combination of powerful performance, user-centric design, and innovative features, the Craftsman 917.27582 stands out as a top contender for those seeking a dependable lawn tractor that simplifies lawn maintenance while delivering exceptional results. Its blend of technology and practicality caters to both novice users and experienced landscapers alike, making it a wise investment for any home.