Pioneer P4200UB Tuner, Menu operations identical, For function settings/audio, Settings/lists

Section
02		Operating this unit
	! Do not store the battery with metallic objects.		Tuner
	! If the battery leaks, wipe the remote control		Basic Operations
		completely clean and install a new battery.
	! When disposing of used batteries, comply		1 2 3		4	5
		with governmental regulations or environmen-
		tal public institutions’ rules that apply in your
		country/area.
	! “Perchlorate Material – special handling may
		apply.
		See www.dtsc.ca.gov/hazardouswaste/
		perchlorate. (Applicable to California, U.S.A.)”
			6
		Important	1 Band indicator
	! Do not store the remote control in high tem-		2 5 (stereo) indicator
			3 LOC indicator
		peratures or direct sunlight.
				Appears when local seek tuning is on.
	! The remote control may not function properly
			4 Preset number indicator
		in direct sunlight.
			5 Signal level indicator
	! Do not let the remote control fall onto the
			6 Frequency indicator
		floor, where it may become jammed under the
		brake or accelerator pedal.
				Selecting a band
				1 Press BAND/ESC until the desired band (FM-1,
	Menu operations identical			FM-2, FM-3 for FM or AM) is displayed.
				Manual tuning (step by step)
	for function settings/audio			1 Push M.C. left or right.
	adjustments/initial
				Seeking
	settings/lists			1 Push and hold M.C. left or right.
				You can cancel seek tuning by pushing M.C. left
				or right.
	Returning to the previous display			While pushing and holding M.C. left or right, you
	Returning to the previous list/category (the folder/ca-			can skip stations. Seek tuning starts as soon as
	tegory one level higher)			you release M.C.
	1 Press DISP/ /SCRL.
	Returning to the main menu		Storing and recalling stations
	Returning to the top tier of list/category
	1 Press and hold DISP/ /SCRL.		You can easily store up to six stations for each
	Returning to the ordinary display
			band as presets.
	Canceling the initial setting menu
	1 Press BAND/ESC.		1 Press (list).
	Returning to the ordinary display from the list/cate-		Preset screen is displayed.
	gory		2 Use M.C. to store the selected fre-
	1 Press BAND/ESC.
			quency in memory.
			Turn to change the preset number. Press and
			hold to store.
			3 Use M.C. to select the desired station.
			Turn to change the station. Press to select.

8 En