Pioneer P4200UB operation manual Operating this unit Audio Adjustments

Section

02 Operating this unit

Audio Adjustments			You can adjust the currently selected equalizer curve
			setting as desired. Adjusted equalizer curve settings
			are memorized in Custom1 or Custom2.
		!		A separate Custom1 curve can be created for
				each source. If you make adjustments when a
				curve other than Custom2 is selected, the equali-
		!		zer curve settings will be memorized in Custom1.
				A Custom2 curve can be created common to all
	1			sources. If you make adjustments when the Cus-
1 Audio display				tom2 curve is selected, the Custom2 curve will
				be updated.
Shows the audio adjustment status.		1		Recall the equalizer curve you want to adjust.
		2		Push M.C. left or right to select the equalizer
1 Press M.C. to display the main menu.				band to adjust.
				100Hz—315Hz—1.25kHz—3.15kHz—8kHz
2 Turn M.C. to change the menu option		3		Push M.C. up or down to adjust the equalizer
and press to select AUDIO.				curve.
				+6 to –6 is displayed as the equalizer curve is in-
3 Turn M.C. to select the audio function.				creased or decreased.
After selecting, perform the following proce-			LOUD (loudness)
dures to set the audio function.			Loudness compensates for deficiencies in the low-
			and high-frequency ranges at low volume.
Fader/Balance (fader/balance adjustment)
		1		Press M.C. to turn loudness on or off.
1 Push M.C. up or down to adjust front/rear speaker		2		Push M.C. left or right to select the desired set-
				ting.
balance.
				Low (low)—Mid (mid)—High (high)—OFF (off)
F15 to R15 is displayed as the front/rear speaker
			Sub W.1 (subwoofer on/off setting)
balance moves from front to rear.
!	F/R 0 is the proper setting when only two		This unit is equipped with a subwoofer output which
	speakers are used.
			can be turned on or off.
!	When the rear output setting is Rear SP :S/W,
		1		Press M.C. to turn subwoofer output on or off.
	you cannot adjust front/rear speaker balance.
		2		Push M.C. left or right to select the phase of sub-
	Refer to S/W control (rear output and subwoo-
				woofer output.
	fer setting) on page 16.
				Push M.C. left to select reverse phase and Re-
2 Push M.C. left or right to adjust left/right speaker
				verse appears in the display. Push M.C. right to
balance.
				select normal phase and Normal appears in the
L15 to R15 is displayed as the left/right speaker
				display.
balance moves from left to right.
			Sub W.2 (subwoofer adjustment)
Powerful (equalizer recall)
			When the subwoofer output is on, you can adjust the
1 Push M.C. left or right to select an equalizer
			cut-off frequency and the output level of the subwoo-
curve.			fer.
Powerful—Natural—Vocal—Custom1—Cus-			Only frequencies lower than those in the selected
tom2—Flat—S.Bass			range are outputted from the subwoofer.
! When Flat is selected no adjustments are		1		Push M.C. left or right to select cut-off frequency.
	made to the sound.			50Hz—63Hz—80Hz—100Hz—125Hz
		2		Push M.C. up or down to adjust the output level
100 Hz (equalizer adjustment)
				of the subwoofer.

Each time M.C. is pushed up or down, subwoofer level increases or decreases. +6 to -24 is dis- played as the level is increased or decreased.

Bass (bass boost)

14 En