Section
03
Available accessories
Basic Operations
Selecting the desired text information
1Press DISP/
/SCRL.
Broadcast frequency/station
Scrolling the text information to the left
1Press and hold DISP/
/SCRL.
1Band indicator
25 (stereo) indicator
Appears when the selected frequency is being broadcast in stereo.
3LOC indicator
Appears when local seek tuning is on.
4Preset number indicator
5Signal level indicator
Shows the radio wave strength.
6Frequency indicator
Selecting a band
1Press BAND/ESC until the desired band
Manual tuning (step by step)
1Push M.C. left or right.
Seeking
1Push and hold M.C. left or right.
You can cancel seek tuning by pushing M.C. left or right.
While pushing and holding M.C. left or right, you can skip stations. Seek tuning starts as soon as you release M.C.
Storing and recalling stations
The operation is the same as that of the tuner. (Refer to Storing and recalling stations on page 8.)
Using iTunes tagging
This function can be operated with the following iPod models.
—iPod 5th generation
—iPod nano 3rd generation
—iPod nano 4th generation
—iPod classic
—iPod classic 120GB
—iPod touch
—iPod touch 2nd generation
—iPhone
—iPhone 3G
However, tag information can be stored in this unit even while the other iPod models are used. It is possible to save the song’s information (tag) from broadcasting station to your iPod. The songs will show up in a playlist called “Tagged playlist” in iTunes the next time you sync your iPod. Then you can directly buy the songs you want from iTunes Music Store.
Storing the tag information to this unit
1Tune in the broadcast station.
2Press and hold M.C. if TAG is indicated in the dis- play while desired song is broadcasting.
!While storing the tag data on this unit, TAG flashes.
Storing the tagged information to your iPod
1Connect the iPod to this unit and transfer this unit’s tag information to the iPod.
Switching the display
Desired information can be displayed while tag information has been broadcasting.
/TAG.
En