Pioneer P4200UB Initial Settings, When selecting FM as the source, you cannot switch to SLA

	Section
Operating this unit	02

1Push M.C. up or down to select a desired level.

0 to +6 is displayed as the level is increased or de- creased.

HPF (high pass filter adjustment)

When you do not want low sounds from the subwoo- fer output frequency range to play from the front or rear speakers, turn on the HPF (high pass filter). Only frequencies higher than those in the selected range are output from the front or rear speakers.

1Press M.C. to turn high pass filter on or off.

2Push M.C. left or right to select cut-off frequency. 50Hz—63Hz—80Hz—100Hz—125Hz

SLA (source level adjustment)

SLA (Source level adjustment) lets you adjust the vo- lume level of each source to prevent radical changes in volume when switching between sources.

!Settings are based on the FM volume level, which remains unchanged.

Before adjusting source levels, compare the FM volume level with the level of the source you wish to adjust.

!The AM volume level can also be adjusted with

source level adjustments.

1Push M.C. up or down to adjust the source vo- lume.

Adjustment range: +4 to –4

Note

When selecting FM as the source, you cannot switch to SLA.

Initial Settings

2Press M.C. and hold until the initial set- ting menu appears in the display.

3Turn M.C. to select the initial setting. After selecting, perform the following proce- dures to set the initial setting.

Language select (multi language)

For your convenience, this unit equips multiple lan- guage display. You can select the language best sui- ted to your first language.

1Press M.C. to select the language. English—Français—Español

Calendar (setting the date)

1Push M.C. left or right to select the segment of the calendar display you wish to set. Year—Day—Month

2Push M.C. up or down to set the date.

Clock (setting the clock)

1Push M.C. left or right to select the segment of the clock display you wish to set. Hour—Minute

2Push M.C. up or down to put a clock right.

!You can match the clock to a time signal by press- ing M.C.

!If 00 to 29, the minutes are rounded down. (e.g., 10:18 becomes 10:00.)

!If 30 to 59, the minutes are rounded up. (e.g., 10:36 becomes 11:00.)

EngineTime alert (elapsed time display setting)

This setting allows you to measure the length of time that elapses from when the machine is turned on and display the amount of elapsed time per set period.

Also, you will hear alarm.

1Press M.C. to select your favorite setting. OFF—15Minutes—30Minutes

USB plug&play (plug and play)

English

1

1Function display

! Shows the function status.

1Press SRC/OFF and hold until the unit turns off.

En 15