Before You Start
Section
01
U.S.A.
Pioneer Electronics (USA) Inc.
CUSTOMER SUPPORT DIVISION P.O. Box 1760
Long Beach, CA
CANADA
Pioneer Electronics of Canada, Inc.
CUSTOMER SATISFACTION DEPARTMENT 300 Allstate Parkway
Markham, Ontario L3R 0P2
For warranty information please see the Lim- ited Warranty sheet included with this unit. 
In case of trouble
Should this unit fail to operate properly, please contact your dealer or nearest authorized PIONEER Service Station.
!Remember that if the feature demo continues operating when the car engine is turned off, it may drain battery power.
The demo automatically starts when the igni- tion switch is set to ACC or ON while the unit is turned off. Turning off the unit does not can- cel demo mode. To cancel the demo mode, press DISP/
/SCRL. Press DISP/
/SCRL again to start. Operating the demo while the ignition switch is set to ACC may drain battery power. 
Reverse mode
If you do not perform an operation within about 30 seconds, screen indications start to reverse, and then continue reversing every 10 seconds. Pressing button BAND/ESC when power to this unit is turned off while the igni- tion switch is set to ACC or ON cancels the re- verse mode. Press button BAND/ESC again to start the reverse mode.
English
Visit our website
http://www.pioneerelectronics.com
!Learn about product updates (such as firm- ware updates) for your product.
!Register your product to receive notices about product updates and to safeguard purchase details in our files in the event of loss or theft.
!Access owner's manuals, spare parts infor-
mation, service information, and much more. 
Resetting the microprocessor
The microprocessor must be reset under the following conditions:
!Prior to using this unit for the first time after installation
!If the unit fails to operate properly
!When strange or incorrect messages ap- pear on the display
Demo mode
Important
!Failure to connect the red lead (ACC) of this unit to a terminal coupled with ignition switch on/off operations may lead to battery drain.
RESET button
1Remove the front panel.
2Press RESET with a pen tip or other pointed instrument. 
En | 5 |
