Section
03
Available accessories
Taking a phone call
Answering or rejecting an incoming call
Answering an incoming call
1When a call comes in, press M.C.
!You can also perform this operation by push- ing M.C. up.
End a call
1Push M.C. down.
Rejecting an incoming call
1When a call comes in, push M.C. down.
Notes
!If private mode is selected on the cellular phone,
!The estimated call time appears in the display (this may differ slightly from the actual call time).
Operating a call waiting
Answering a call waiting
1When a call comes in, press M.C.
!You can also perform this operation by push- ing M.C. up.
End all calls
1Push M.C. down.
Switch between callers on hold
1Press M.C.
!You can also perform this operation by push- ing M.C. up.
Rejecting call waiting
1Push M.C. down.
Notes
!Pushing M.C. down ends all calls including calls waiting on line.
!To end the call, both you and your caller need to hang up the phone.
2Turn M.C. to change the menu option and press to select FUNCTION.
3Turn M.C. to select the function.
After selecting, perform the following proce- dures to set the function.
Search & Connect (searching for available cellular phone)
!This function cannnot be operatad when the cellu-
lar phone is connected.
1Press M.C. to search for available cellular phones. While searching, Searching flashes. When avail- able cellular phones featuring Bluetooth wireless technology are found, device name or Name not found (if names cannot be obtained) is displayed.
!If this unit fails to find any available cellular phones, Not found is displayed.
2Push M.C. up or down to select a device name you want to connect.
3Press M.C. to connect the selected cellular phone.
While connecting, Connecting flashes. To com- plete the connection, check the device name (Pioneer BT Unit) and enter the link code on your cellular phone. If the connection is established, Connected is displayed.
!PIN code is set to 0000 as the default. You can change this code. Refer to
Pin code input (PIN code input) on page 16.
Connection open (connecting from cellular phone)
!This function cannnot be operatad when the cellu- lar phone is connected.
1Press M.C. to open the connection.
Disconnect phone (disconnecting a cellular phone)
!This function cannot be operated when the cellu- lar phone is not conntected.
1Press M.C. to disconnect a cellular phone from this unit.
After disconnection is completed, Disconnected is displayed.
Connect phone (connecting a registered cellular phone)
Function and operation
1 Press M.C. to display the main menu.
En