Whirlpool AD0402XS0 manual Setting the Water Level Adjustment, To Operate

Models: AD0402XS0

1 12
Download 12 pages 10.82 Kb
Page 6
Image 6
To Operate:

To Operate:

1.Turn Humidistat Control to UNIT OFF.then plug in the dehumidifier.

2.Your dehumidifier has an automatic humidi- stat. Turn Humidistat Control left toward DRYEST for normal operation. Set at number 5 or 6 to start. Adjust later, if necessary.

When humidity in the room increases, the

dehumidifier automatically starts. When the hu- midity decreases to the selected level, the de-

humidifier automatically stops.

3.If you need more dehumidification, tzn control to a higher number. Unit will run continuously at DRYEST setting. If you need less, set on a lower number.

4.Stop the unit manually by turning the control to

UNIT OFF

Setting the Water Level Adjustment

All models except the 15 pint (7.0 L) capacity model have an adjustable water level.

The Water Level Adjustment can be set in two positions to automatically turn off the unit when the pan is full (water level will be 1to 4 inches from top of water pan). This prevents the danger of overflow.

Pan must be in proper position for Water level Control Switch to work.

NORMAL FILL -

Water Level Adjustment set on the

left side indentation. The water pan will be slightly more than % full. The water pan and water will

weigh approximately 16 Ibs. (7.2 kg).

MAXIMUM FILL -

Move the Water Level Adjustment to the raised area on the right side. The water pan will be ap- proximately 3/dfull. The water pan and water will weigh approx- imately 24 Ibs. (10.8 kg).

The Water Level Control Switch will automatically turn off the dehumidifier at the fill level you selected when pan is properly placed. Loosen the screw to move the Water Level Adjustment. Retighten screw when adjusted.

Page 6
Image 6
Whirlpool AD0402XS0 manual Setting the Water Level Adjustment, To Operate