Operation
Software Version
Range Limitation
Reset Control
System Default
Continued from previous page
1)Go to MENU > INTRO > INFO.
a)The display will show the installed software version.
1)Go to MENU > RANGE > P/START.
a)Select the starting point for the limited pan (000~255).
2)Go to MENU > RANGE > P/FINISH.
b)Select the finishing point for the limited pan (000~255).
3)Go to MENU > RANGE > T/START.
c)Select the starting point for the limited tilt (000~255).
4)Go to MENU > RANGE > T/FINISH.
d)Select the finishing point for the limited tilt (000~255).
5)Go to MENU > RANGE > USE.
e)Select YES to activate the new settings or NO to stop using them.
1)Go to MENU > SPECIAL > BLACK.
a)Select YES to enable the 3 seconds delay or NO to make the blackout immediate.
1)Go to MENU > SPECIAL > RESET.
a)Select DMX to enable the DMX controller to reset the fixture (Control function) or NO to reset the fixture only from the control panel.
1)Go to MENU > DEFAULT > DEFAULT.
a)Select YES to default the fixture to its original factory settings.
End of Programming
